bfd source-interface (CloudEOS and vEOS)

The bfd source-interface command in the cloud-ha configuration submode configures BFD source interface parameters for the high availability peer. The no bfd source-interface command removed the BFD configurations from the CloudEOS and vEOS running-config.

Command Mode

Global Cloud HA peer configuration mode

Command Syntax

#bfd source-interface [Interface_Type]single-hop

#no bfd source-interface

Parameters

  • Interface_Type
    • Ethernet Ethernet Port number <1-4>.
    • Loopback Loopback interface <0-1000>.
    • Tunnel Tunnel interface <0-255>.
  • Single-hop Single hop BFD . Default is multi-hop.

Example:

The following example configures Ethernet 1 as the source interface for BFD and multi-hop set as the default . 

switch(config)#cloud high-availability 
switch(config-cloud-ha)#peer veos2
switch(config-cloud-ha-peer-veos2)#bfd source-interface ethernet 1

Example:

The following example configures Tunnel 2 as a single hop the source interface for BFD. 

switch(config)#cloud high-availability 
switch(config-cloud-ha)#peer veos2
switch(config-cloud-ha-peer-veos2)#bfd source-interface tunnel 2 single-hop

Example:

The following example removes the BFD configuration. 

switch(config-cloud-ha-peer-veos2)#no bfd source-interface