Creating an Virtual Network Gateway

  1. After creating the virtual network, a virtual network gateway(AnetVGW) is created. The Virtual Network Gateway must have a public IP address. By default BGP is disabled on the Virtual Network Gateway. In this example below the BGP enabled to demonstrate the BGP session over the IPsec connection.
    Note: ICMP is blocked and hence ping to the AnetVGW fails.
  2. Provide the public IP address name.
  3. Click on the Review+create tab to proceed with the deployment.
  4. Finally you see this page on successful deployment.
  5. This page provides you information about the resources and other information related to the deployment.