1
|
System Status LED
|
2
|
Fan Status LED
|
3
|
Power Supply Status LED
|
4
|
Switch Card Status LED
|
LED Name
|
LED State
|
Module State
|
Power Supply
|
Green
|
All powered modules are operating normally.
|
Red
|
At least one module has failed.
|
|
System
|
Green
|
All linecards are operating normally.
|
Red
|
At least one linecard has failed.
|
|
Switch Card
|
Green
|
Module is operating normally.
|
Red
|
Module has failed.
|
|
Fan
|
Amber
|
At least one fan is missing or has failed.
|
Green
|
All modules are operating normally.
|
|
Red
|
There are insufficient functional fans installed in the switch.
|
1
|
Linecard Port LEDs
|
2
|
Linecard Status LED
|
3
|
Linecard Ejector Latch
|
|
|
LED State
|
Status
|
Off
|
Line card not inserted.
|
Green
|
Line card operating normally.
|
Amber
|
Line card administratively shut down.
|
Red
|
Line card has failed.
|
LED State
|
Status
|
Off
|
Port link is down.
|
Green
|
Port link is up.
|
Yellow
|
Port is disabled in software.
|
1
|
Fan Release Handle
|
2
|
Fan Installation Indicator
|
3
|
Fan Status LED
|
|
|
LED State
|
Status
|
Off
|
The module is inserted but not receiving power – it may not be properly seated.
|
Green
|
The module is operating normally.
|
Red
|
The module has failed.
|
1
|
Power Supply Status LED
|
|
|
LED
|
Status
|
Green
|
Power Supply module operating normally.
|
Off
|
No AC power to the module.
|
Red
|
Module has faulted.
|
Blinking Green
|
PSU has AC power but hasn't been enabled by the system - indicates that either the power supply or the Switch Module isn't fully inserted.
|