Total 50 results found for the keyword of "eos command line interface"
... CLI. This chapter includes these sections: Accessing the eos CLI Processing commands Kernel-based Virtual Machine commands and Configuration Switch Platforms command Modes Managing Switch Configuration ...
VXLAN commands VXLAN Global Configuration commands interface vxlan ip address virtual vxlan vni notation dotted VXLAN interface Configuration commands vxlan flood vtep vxlan multicast-group ...
Octal Port Renumber to Four interfaces For an octal port such as a QSFPDD or OSFP, this feature renumbers the ports on a system to have 4 configurable interfaces instead of eight. The original octal ...
Environment commands Environment Control Configuration commands environment fan-speed environment insufficient-fans action environment overheat action locator-led Environment Display commands ...
...  Note: In eos releases prior to 4.23.2, this command identified system peers with IPv6 addresses by their reference IDs (the first four octets of the MD5 hash of the IPv6 address). In later releases, ...
... the password from the encrypted string. If the clear-text password is lost, delete the corresponding PASSWORD command line from the boot-config file. Note: The eos boot secret command adds or modifies ...
... can be enabled or disabled on the fly without impacting regular packet forwarding functionality. NDR Switch Sensor Extension NDR switch sensor extends eos telemetry for network threat detection. The ...
... manager can request or change. The agent gathers data from the MIB and responds to requests for information. For a list of supported MIBs, refer to the release notes for the specific eos version. This ...
...  sFlow exports packet samples and topology meta data to a centralized collector application. sFlow scales and operates on all switch ports simultaneously. eos implements sFlow on all switches, without ...
Latency Analyzer (LANZ) Arista Networks’ Latency Analyzer (LANZ) is a family of eos features that provide enhanced visibility into network dynamics, particularly in areas related to the delay packets experience ...
... timestamp Drop count Device ID Egress interface FCS type Reserved TAP Aggregation Extra MPLS Pop (4 to 6 Labels) Available starting with eos Release 4.23.1F extra MPLS pop for TAP Aggregation ...
...  eos adds a new parameter in the output, evpn prefix detail to display the ATTR_SET, code 128 attributes. switch#show bgp evpn BGP routing table information for VRF default Router identifier 10.11.0.1, ...
... a GRE tunnel, the payload of the outgoing GRE packet contains the payload of the incoming source packet starting from the MPLS header. eos strips L2 and outer L3 headers from the mirror copy. When the MPLS ...
... router-mac ba:ed:43:3f:ca:8e MLAG This feature applies only to the scenario when two different MLAG VTEP pairs learn the remote prefix. Prior to 4.26.0F, eos supports this feature on the primary ...
...  VXLAN Decapsulation for interface with multiple VRFs Please refer to the following security advisory after the eos software upgrade for a network that leverages VXLAN decapsulation on an interface ...
Multicast Source Discovery Protocol (MSDP) Multicast Source Discovery Protocol (MSDP) describes a topology that connects multiple IPv4 Protocol Independent Multicast Sparse-Mode (PIM-SM) domains. ...
... interface vlan 8 switch(config-if-Vl8)# pim ipv4 sparse-mode switch(config-if-Vl8)# Enabling PIM IPv6 Sparse Mode By default, eos disables IPv6 PIM disabled on an interface. The pim ipv6 sparse-mode ...
IGMP and IGMP Snooping IGMP Snooping IGMP Host Proxy Description Supported Features IGMP Protocols Configuring IGMP Configuring IGMP Snooping IGMP Host Proxy IGMP and IGMP Snooping commands ...
... Beginning with eos Release 4.25.0F, MLDv2 snooping is supported on MLAG deployments. Limitations The extraneous “Switch” interface should be ignored in show mld snooping counters and show mld snooping counters ...
...  if Conditions Immediate Values Attributes and Functions External References to eos Policy Constructs External Reference Compilation Checks Using the input Attribute Scope Comments Comments ...