Total 27 results found for the keyword of "eos section 11 3 ethernet physical layer"
...
eos is optimized to support QoS configuration on the Fabric interfaces on 7250x and 7300 series switches. Configuring QoS on the Fabric interfaces in addition to front panel ports allows user to have ...
... (also configured as a dynamic LAG) on the partner switch. The maximum number of ports per LAG varies by platform; numbers for each platform in the latest eos release are available here: https://www.arista.com/en/support/product-documentation/supported-features. ...
... MLAG peer switches are identical platforms and run identical eos images. Running different images/platform may result in a failure to form an association with the MLAG peer or see discrepancy in behavior. ...
... Type Ports
---- ----------- ---- -----
Total Mac Addresses for this criterion: 0
Beginning with eos Release 4.26.0F,
PortSec-Protect enforces a limit on the number of MAC
addresses, ...
... successor to Secure Sockets layer (SSL), is a security protocol used to communicate between client and server. It establishes an encrypted communication channel to secure data.
By default, eos uses a ...
...
MACsec Licensing
MACsec encryption is a eos licensed feature. A valid MACsec license must be configured on a switch. MACsec licenses are tied to a switch serial number and the licensee. ...
show l1 matrix
The show l1 matrix command displays the matrix
representation of layer 1 paths foravailable interfaces in the privileged EXEC
mode.
Command Mode
Privileged EXEC
Command Syntax
...