Total 33 results found for the keyword of "eos section 6 5 event monitor"
... ensure disable-vrf configuration to take effect. switch(config)# agent SandL3Unicast terminate SandL3Unicast was terminated Starting from the eos Release 4.26.0F, /32 prefix length optimization ...
...  eos is optimized to support QoS configuration on the Fabric interfaces on 7250x and 7300 series switches. Configuring QoS on the Fabric interfaces in addition to front panel ports allows user to have ...
... (eos release 4.25.2F) Support of 400GBASE-ZR with Open Forward Error Correction (O-FEC) (eos release 4.25.2F) Override a transceiver slot’s maximum power limit (eos release 4.25.2F) Platform Compatibility ...
... MLAG peer switches are identical platforms and run identical eos images. Running different images/platform may result in a failure to form an association with the MLAG peer or see discrepancy in behavior. ...
...  Type Ports ---- ----------- ---- ----- Total Mac Addresses for this criterion: 0 Beginning with eos Release 4.26.0F, PortSec-Protect enforces a limit on the number of MAC addresses, ...
...  MACsec Licensing MACsec encryption is a eos licensed feature. A valid MACsec license must be configured on a switch. MACsec licenses are tied to a switch serial number and the licensee. ...
Precision Time Protocol (PTP) Commands PTP Commands ptp announce interval ptp announce timeout ptp delay-mechanism ptp delay-req interval ptp domain ptp enable ptp forward-v1 ptp hold-ptp-time ...
Managing eos Extensions The most simple and efficient way to make the most of the extensibility on which eos is built is through the use of extensions. An extension is a pre-packaged optional feature ...
... command replaces the EOS CLI prompt with an SQLite prompt.switch# event-monitor interact sqlite> This command exits SQLite and returns to the EOS CLI prompt.sqlite> .quit switch# event-monitor ...
...  Restoring the Factory Default eos Image and Startup Configuration USB Support for ZeroTouch Provisioning Restoring the Configuration and Image from a USB Flash Drive The first three procedures require ...
... sections: Managing the Switch Name System Clock and Time Protocols Managing Display Attributes Logging of event Notifications event monitor Managing eos Extensions Switch Administration Commands ...
... CLI. This chapter includes these sections: Accessing the eos CLI Processing Commands Kernel-based Virtual Machine Commands and Configuration Switch Platforms Command Modes Managing Switch Configuration ...
... system Aboot 1.9.0-52504.eos2.0 Press Control-C now to enter Aboot shell To continue the reload process, do nothing. Typing Ctrl-C opens the Aboot shell; see Aboot Commands for Aboot editing ...