Book Search Results

Sample configurations EVPN VXLAN IRB Sample configuration In the topology below, we are connecting a Layer 2 site with a Layer 3 site using Layer 3 EVPN (type-5 route). Right side leaves are MLAG ...

EVPN and VCS commands Router BGP configuration Mode next-hop resolution disabled redistribute service vxlan route-target route-target export route-target import route-target route-map  ...

MPLS commands MPLS commands mpls ip mpls static show mpls route show mpls route summary mpls ip The mpls ip command enables MPLS routing. Multiprotocol Label Switching ...

ethernet VPN (EVPN) This chapter describes Arista’s EVPN implementation. sections in this chapter include: EVPN Overview EVPN Layer 3 Core Operations Integrated Routing and Bridging VPN MPLS ...

... full10G Not Present Et4/7 connected1 full10G Not Present Et4/8 connected1 full10G Not Present Et4/9 connected1 full10G Not Present switch> Referencing Multi-lane Ports eos supports two types of ...

Precision Time Protocol (PTP) commands PTP commands ptp announce interval ptp announce timeout ptp delay-mechanism ptp delay-req interval ptp domain ptp enable ptp forward-v1 ptp hold-ptp-time ...

...  This command replaces the EOS CLI prompt with an SQLite prompt.switch#event-monitor interact sqlite> This command exits SQLite and returns to the EOS CLI prompt.sqlite> .quit switch# event-monitor ...

... server. Command authorization can be provided by eos local configuration or TACACS+. The XMPP server should use the same authentication source as the switches. RADIUS is not supported as an XMPP authorization ...

...  TAP Aggregation QoS Handling on TAP Ports Before eos 4.20.5F, QoS behavior was not enforced for TAP aggregation ports, meaning that QoS behavior for packets passing through the device was not ...

Latency Analyzer (LANZ) Arista Networks’ Latency Analyzer (LANZ) is a family of eos features that provide enhanced visibility into network dynamics, particularly in areas related to the delay packets experience ...

... sent 0:12:27 ago show flow tracking sampled flow-table The show flow tracking sampled flow-table command displays information about the active flows maintained in the eos. Command Mode EXEC ...

sFlow This chapter describes Arista's implementation of sFlow, including configuration instructions and command descriptions. Topics covered by this chapter include: sFlow Conceptual Overview sFlow ...

... the manager can request or change. The agent gathers data from the MIB and responds to requests for information. For a list of supported MIBs, please refer to the release notes for a specific eos version. ...

VM Tracer This chapter describes VM Tracer configuration and usage and contains these sections: VM Tracer Introduction VM Tracer Description VM Tracer configuration Procedures VM Tracer ...

MapReduce Tracer This section describes Arista’s implementation of MapReduce Tracer, including configuration instructions and command descriptions. Topics covered by this section include: MapReduce ...

MPLS These sections describe the Arista MPLS implementation: MPLS Description MPLS configuration MPLS Description MPLS Overview Multiprotocol Label Switching (MPLS) is a networking ...

BGP/MPLS L3 VPN Border Gateway Protocol/ Multiprotocol Label Switching (BGP/MPLS) L3 Virtual rivate Network (VPN) allows a Service Provider (SP) or an Enterprise to provide the service of interconnecting geographically ...

Audio Video Bridging (AVB) Arista switches support Audio Video Bridging (AVB) and the associated protocols. This section describes AVB concepts and the implementation of associated protocols. Topics ...

VXLAN Description These sections describe VXLAN architecture, the data objects that comprise a VXLAN network, and process of bridging packets through a VXLAN network. VXLAN Architecture VXLAN Processes  ...

VXLAN Command Descriptions VXLAN Global configuration commands interface vxlan ip address virtual vxlan vni notation dotted VXLAN Interface configuration commands vxlan flood vtep  ...