Print

VeloCloud SD-WAN Edge Appliances - Installing the Edge Appliance Print

Installing the Edge Appliance

The Edge appliance can be placed on a table or a flat surface, or it can be mounted on the wall. The appliance comes with the feet attached. Place it on a flat surface, plug it into a power source, and it's ready to be activated.

Wall Mount the Edge Appliance

Follow these steps to wall mount the appliance:
Note: If your appliance supports an external antenna (for example, Edge 710-5G), wall mount the appliance first before attaching the antennas.
  1. Loosen the screws from all four feet of the Edge appliance and remove them. Retain the screws as you will need them later.
  2. Align the wall mount bracket on the appliance such that the holes on the appliance align with the holes on the bracket.
    Figure 1. Wall Mount Bracket
  3. Use the same screws to tighten the bracket.
..