The front panel of the O-235 has 6 LEDs that indicate the status of various device functions.
|2||2.4 GHz Radio|
|3||5 GHz Radio|
Power LED: The following table describes the Power LED states.
|Solid||Running at full capability||Running at reduced capability|
|Blinking||Received IP address, but not connected to the server||Did not receive an IP address|
Reduced capability indicates that the AP is getting lower than the required maximum power from the PoE+ switch, i.e., 802.3af instead of 802.3at.
LAN1 LED: ON when the corresponding interface is up.
LAN2 LED: ON when the corresponding interface is up and either wired guest or link aggregation is configured.
Radio LEDs: ON when the corresponding radio is operational.