Print

Package Content

The access point (AP) package must contain the components shown in the following figure.
Figure 1. Package Components
Table 1. Labels: Package Components
Label Description
1 O-235 Access Point
2 2 metal clamps for fixing the mounting bracket to the pole
3 Mounting bracket
4 4 steel bosses for fixing AP in the bracket
5 Philips screw to secure the AP to the bracket
6 Earthing screw fitted at the back of AP with dimension 6.8 ±0.2 mm
7 Philips #2 screwdriver to tighten the screw
8 Earthing screw - 2.6 ±0.2 mm
9 Earthing screw - 5.8 ±0.2 mm
10 Earthing screw thread - M4 × 0.5 mm
Important:The MAC address of the AP is printed on a label at the bottom of the product and the packaging box. Note down the MAC address before mounting the AP.

If the package is not complete, please contact Arista Networks Technical Support Team at This email address is being protected from spambots. You need JavaScript enabled to view it. or return the package to the vendor or dealer where you purchased the product.

..