- Written by Kaladhar Musunuru
- Posted on May 4, 2020
- Updated on July 14, 2023
- 9206 Views
This feature introduces support for ACL configuration on VXLAN decapsulated packets. The configured ACL rules will
- Written by Kaladhar Musunuru
- Posted on May 4, 2020
- Updated on August 16, 2024
- 6379 Views
Ethernet VPN (EVPN) is an extension of the BGP protocol introducing a new address family: L2VPN (address family number 25) / EVPN (subsequent address family number 70). It is used to exchange overlay MAC and IP address reachability information between BGP peers using type-2 routes, but additionally, EVPN supports the exchange of layer 3 IPv4 and IPv6 overlay routes through the extensions described in (type 5 EVPN routes).
- Written by Kaladhar Musunuru
- Posted on January 23, 2019
- Updated on January 23, 2019
- 7534 Views
This feature provides total ingress MPLS packet and byte counters received per interface. DCS
- Written by Kaladhar Musunuru
- Posted on May 17, 2018
- Updated on May 17, 2018
- 8003 Views
This feature provides per label ingress packet and byte counters for MPLS routed packets. DCS
- Written by Kaladhar Musunuru
- Posted on April 18, 2018
- Updated on May 13, 2018
- 8063 Views
This feature provides support for per interface ingress packet and byte counters for both IPv4 and IPv6.
- Written by Kaladhar Musunuru
- Posted on September 30, 2015
- Updated on January 20, 2023
- 9384 Views
The nexthop group feature allows users to manually configure a set of tunnels. Nexthop group counters provide the ability to count packets and bytes associated with each tunnel nexthop, irrespective of the number of times it appears in one or more nexthop groups. In other words, if a nexthop group entry shares a tunnel resource with another entry, they will also share the same counter.