- Written by Tony Truong
- Posted on March 14, 2024
- Updated on March 14, 2024
- 480 Views
The 7280CR3-36S series include the ability to toggle ports Ethernet33-36 between pairs of 200G QSFP56 ports and a single 400G QSFP-DD port on the odd Ethernet port, disabling the corresponding even Ethernet port. The supported speed capabilities of QSFP-DD ports vary depending on which hardware port group is selected. This document details how to configure the hardware port groups on QSFP-DD ports.
- Written by Tony Truong
- Posted on June 5, 2023
- Updated on October 16, 2023
- 3171 Views
EOS-4.30.0F adds support for relaxing L1 CLI guards. This feature allows the ability to configure the handling of unsupported L1 configurations (e.g. speed, error-correction, etc.): either rejecting the unsupported configurations with error messages or prompting for confirmation with warning messages.
- Written by Tony Truong
- Posted on June 10, 2019
- Updated on June 12, 2019
- 5103 Views
This feature allows the user to reset the forward error correction (FEC) statistics counters shown in the output of
- Written by Tony Truong
- Posted on July 13, 2018
- Updated on July 13, 2018
- 5016 Views
EOS 4.20.6F adds support for customizing SFP+ and QSFP+ transceiver transmit and receive DOM thresholds. There are
- Written by Tony Truong
- Posted on September 30, 2015
- Updated on October 1, 2015
- 3649 Views
As of EOS 4.15.2F, the support for the tuning of tunable DWDM 10G SFP+ transceivers (10GBASE DWDM) is added.