- Written by Manish
- Posted on May 17, 2022
- Updated on September 13, 2022
- 1836 Views
CVP uses nginx to terminate all the HTTPS connections for which the nginx needs to be configured with a certificate. This certificate could either be self-signed or signed by the CA. Figure 1 shows the generation and installation of self-signed certificates.
- Written by Lavanya Conjeevaram
- Posted on September 4, 2022
- Updated on February 1, 2023
- 1395 Views
It is possible to have MSS-G configuration pushed automatically to CloudVision from an external system. This document covers the use of Forescout eyeSegment for policy definition and eyeSight for segment assignment.
- Written by Albert Seo
- Posted on January 12, 2023
- Updated on January 12, 2023
- 700 Views
802.1X information shows which endpoints have authenticated, are undergoing authentication, or have failed to authenticate to the network. This information is available to view in two locations from CloudVision: the 802.1X page in the Devices application, and the Dashboards application.
- Written by Pranjit Bharali
- Posted on September 16, 2021
- Updated on September 22, 2022
- 4978 Views
AAA Providers OAUTH and SAML Support AAA Providers allow users to create and log in to CloudVision with a provider of
- Written by Grzegorz (Greg) Kacy
- Posted on March 15, 2023
- Updated on March 15, 2023
- 334 Views
Whenever CVP code is upgraded (either by the user on-prem, or automatically, on CVAAS), built-in studios are also upgraded. In some cases, the workspace containing that update may not be auto-submitted. There are typically one of two reasons behind this. Either the studio upgrade impact's device's running config (and we want the user to review the changes), or the new studio isn't building because of some error in the workspace.
- Written by Harsh Goyal
- Posted on February 2, 2022
- Updated on March 25, 2022
- 3225 Views
The syslog export feature allows users to export audit logs to external server endpoints and monitor the status of these exports using CloudVision.
- Written by Joseph Walsh
- Posted on September 4, 2022
- Updated on October 26, 2022
- 1364 Views
This is an optional feature that can be enabled to automatically upgrade the EOS image of any device through ZTP. It ensures that all ZTP-enabled devices in your network have a minimum EOS image version.
- Written by Will Rideout
- Posted on February 16, 2021
- Updated on February 22, 2021
- 2496 Views
BFD (Bidirectional Forwarding Detection) session telemetry allows for the collection of per session statistics as
- Written by Shirong Bai
- Posted on November 6, 2019
- Updated on November 8, 2022
- 4798 Views
This document describes the BGP Maintenance Mode (MM) and MLAG ISSU Actions for Change Control to support hitless
- Written by Rudi Fockema
- Posted on September 4, 2022
- Updated on October 26, 2022
- 1276 Views
When a device enters maintenance mode, this event will be triggered. The event will stay active while the device stays in maintenance mode.
- Written by Paul Druce
- Posted on September 4, 2022
- Updated on October 26, 2022
- 1362 Views
New releases of CloudVision may introduce new built-in studios or enhancements to existing built-in studios. Occasionally, these updates may feature improvements and other changes to the configuration template used by the studio and are included as part of the CloudVision release.
- Written by Joseph Walsh
- Posted on September 4, 2022
- Updated on October 26, 2022
- 1328 Views
The Preload feature is used to streamline any change control operations that include an image upgrade. When a change control contains an image upgrade, the Preload feature can be used to create another change control operation that will download the required EOS image versions for each device.
- Written by Karthik Shyam Krishnan Subraveti
- Posted on November 6, 2019
- Updated on May 21, 2020
- 2923 Views
Script action is a very effective feature to enable customers to add their own custom actions to Change controls.
- Written by Ashwin Swaminathan
- Posted on November 6, 2019
- Updated on November 6, 2019
- 2277 Views
The ChangeControl APIs offer a way to programmatically interact with the ChangeControl service on CVP.
- Written by Sudarshan Ravindranath
- Posted on January 12, 2023
- Updated on January 12, 2023
- 629 Views
Action bundles can be created within the Template editor. Based on the selected Action Bundle, the rule container will expose extra fields for the user to provide inputs. If the bundle has a Task action, or an action with a DeviceID argument set to Provide via template, the rule will ask the user to define the Device Filter.
- Written by Ankit Gupta
- Posted on February 2, 2022
- Updated on February 2, 2022
- 2403 Views
When a CVP cluster is deployed in a different location from the devices under management, it is possible that it
- Written by Lavanya Conjeevaram
- Posted on March 20, 2017
- Updated on February 4, 2022
- 2489 Views
Documentation for the new major features is available in the CloudVision User Guide for release 2017.1.0. This TOI
- Written by Grzegorz (Greg) Kacy
- Posted on January 12, 2023
- Updated on January 12, 2023
- 668 Views
Since Device Config diffing is a very important aspect of managing our hardware, we should make sure that this diffing is as convenient as possible. With that we have introduced a few improvements to our diffing component. These improvements range from UX convenience features to performance enhancers.
- Written by Tamas Plugor
- Posted on May 21, 2020
- Updated on November 8, 2022
- 4169 Views
Please do not update packages after minimal installation, the installer ships with all required updated RPMs.
- Written by Timothy Ward
- Posted on November 6, 2019
- Updated on March 18, 2020
- 2279 Views
This document describes a procedure and tooling to reallocate the RAM and CPUs in the DCA CV 100 in order to maximize the
- Written by Romit Shah
- Posted on September 4, 2022
- Updated on December 15, 2022
- 3660 Views
Every switch managed by CVP uses TerminAttr to stream updates to CVP and every one of these TerminAttr connections needs to be authenticated. Authentication is provided via shared key or certificates.
- Written by Murali Krishnamoorthy
- Posted on November 6, 2019
- Updated on December 15, 2022
- 3828 Views
This document describes the TerminAttr certificate authentication feature introduced in the CVP 2019.1.0
- Written by Joseph Walsh
- Posted on February 2, 2022
- Updated on July 13, 2022
- 4710 Views
The AQL panel is a dashboard element that allows you to create custom data displays using the CloudVision Advanced Query Language (AQL). This gives you complete control over what data the panel displays and how it displays it, because you define the inputs and write the AQL query that feeds data to the panel.
- Written by Riku Miyao
- Posted on January 12, 2023
- Updated on January 12, 2023
- 663 Views
When there are a large number of configlets assigned to devices, it becomes important to have a fast and easy way to view configlets assigned to a device. To facilitate this, we have introduced multiple enhancements to the Device Configuration page that makes it easier for a user to navigate the configuration of their devices.
- Written by Rudi Fockema
- Posted on September 4, 2022
- Updated on October 26, 2022
- 1218 Views
The device memory usage prediction event monitors the historical device memory usage via the MemAvailable metric and from this data generates a predicted future value which can be subject to a threshold above which to alert the user on.
- Written by Andrew Gloster
- Posted on February 2, 2022
- Updated on February 7, 2022
- 2166 Views
The disk usage prediction event monitors the historical device disk usage on a given disk partition and from this data
- Written by Timothy Ward
- Posted on November 6, 2019
- Updated on October 18, 2021
- 2547 Views
The figure below shows a conceptual overview of the Arista CVW solution. . As shown in the figure, CVW
- Written by Shravani
- Posted on May 17, 2022
- Updated on September 13, 2022
- 1749 Views
For these events user rules need to be configured for each event. The user needs to define what the threshold is for the HTTP response time or jitter. After the rules are configured the events will trigger if values above these thresholds are seen.
- Written by Dylan Quinn
- Posted on March 15, 2023
- Updated on March 15, 2023
- 387 Views
The Event Notification system is the mechanism that sends alerts when certain events occur the behavior of which is specified by the user.
- Written by Brendan Murray
- Posted on April 29, 2020
- Updated on January 27, 2022
- 2837 Views
This TOI captures new categories of events that have been added in CVP release 20202.1.0. Network
- Written by Timothy Ward
- Posted on November 6, 2019
- Updated on November 6, 2019
- 3303 Views
This document presents several procedures to reduce the time taken to upgrade CVP between major releases. This can
- Written by Gagan Arneja
- Posted on April 29, 2020
- Updated on January 15, 2021
- 3005 Views
Flow Analytics (Beta). NOTE: This is a beta feature in the 2019.1.0 and 2020.1.0 release and is not enabled by
- Written by Emma Gallo
- Posted on February 2, 2022
- Updated on February 2, 2022
- 2255 Views
CVP will generate events when a provisioned device goes out of config or image compliance. When a device is assigned
- Written by Thanh To
- Posted on March 15, 2023
- Updated on March 15, 2023
- 343 Views
Input errors from a failed build are now highlighted in Studios. Previously, after a workspace build failed, the Workspace Build Summary will show a list of reasons for the failure.
- Written by Mateus Malvessi Pereira
- Posted on February 2, 2022
- Updated on December 21, 2022
- 2804 Views
This integration uses TrustSec data from Cisco ISE to create MSS-G configuration to distribute to switches via CloudVision.
- Written by Wei Zhu
- Posted on April 29, 2020
- Updated on April 29, 2020
- 2330 Views
MAC/IP Address Search (Beta Feature) NOTE: This is a beta feature and is not enabled by default. In order to enable
- Written by Lavanya Conjeevaram
- Posted on September 27, 2022
- Updated on October 26, 2022
- 1213 Views
MSS-G or Group-Based Segmentation Security is a security feature that allows users to classify network endpoints into segments and define forwarding policies between segments. A given segment contains a set of hosts that should have identical security properties within the network.
- Written by Quang-Minh Pham
- Posted on January 12, 2023
- Updated on January 12, 2023
- 692 Views
This feature adds additional functionality to the Settings > Access Control > Providers page behind the “Expanded Custom Provider Creation” beta toggle. Enabling the toggle will allow users to create and name multiple custom OAuth and SAML providers.
- Written by Niko John Arellano
- Posted on February 8, 2021
- Updated on February 8, 2021
- 2091 Views
This TOI covers the new Omnibox feature released in 2020.3.0. The Omnibox allows users to search across
- Written by Akashdeep Singh
- Posted on May 17, 2022
- Updated on September 13, 2022
- 1879 Views
Starting from CVP 2022.1.0 it is possible to generate a CSR from the Certificates UI on the Settings and Tools page with an optional SAN IP field. Once an external CA provides the certificate from the CSR, it then can be uploaded back to CVP.
- Written by Joseph Walsh
- Posted on September 4, 2022
- Updated on October 26, 2022
- 1206 Views
Per-Studio RBAC is a new feature that provides CloudVision users with granular control over access permissions for individual studios. A relevant user can grant differing permissions to other users for both management and input configuration of individual studios.
- Written by Quang-Minh Pham
- Posted on May 17, 2022
- Updated on September 13, 2022
- 1782 Views
RADIUS/TACACS Server Ordering allows users to change the priority of RADIUS and TACACS servers and specify which server to try and authenticate with first.
- Written by Quang-Minh Pham
- Posted on February 2, 2022
- Updated on February 2, 2022
- 2176 Views
Session Management is a new section on the CloudVision Settings > General Settings page that allows users to
- Written by Masahiro Toyomura
- Posted on March 15, 2023
- Updated on March 15, 2023
- 359 Views
Several new features related to the studio development are added. These features are turned off for Inventory & Topology Studio.
- Written by Pavlo Dyachenko
- Posted on September 4, 2022
- Updated on October 26, 2022
- 1309 Views
Customers who have subinterfaces configured have the possibility to view them alongside regular interfaces. Subinterface counters on EOS are a hardware feature that is disabled by default.
- Written by Adarsh Jain
- Posted on January 12, 2023
- Updated on January 16, 2023
- 989 Views
The syslog export feature allows users to export audit logs to external server endpoints and monitor the status of these exports using CloudVision.
- Written by Niko John Arellano
- Posted on May 17, 2022
- Updated on September 13, 2022
- 1819 Views
Syslog panel is a dashboard element that allows to you view log messages for the devices both in real-time or a selected timeframe.
- Written by Tamas Plugor
- Posted on March 15, 2023
- Updated on March 15, 2023
- 319 Views
The TAC Bundle Action is a newly available Custom Action Script that can be used to generate a support bundle containing various EOS logs (tech-support, agent logs and quick traces, syslog, accounting, etc.) on selected devices. This can be useful for an investigation during a TAC case, or even as a proactive measurement before
- Written by Rudi Fockema
- Posted on January 12, 2023
- Updated on January 12, 2023
- 692 Views
In a future release, we plan to drop support for device authentication via ingest key completely.To help the customer with this process, we are adding this event that flags all devices running with ingest key authentication.
- Written by Ryan Madsen
- Posted on April 29, 2020
- Updated on April 29, 2020
- 2228 Views
TOI Topology View Enhancements. This TOI covers the following enhancements to Topology View in the 2020.1.0