Side Panel
The side panel of the AP has a reset pinhole, USB port, and console port.

Label | Description |
---|---|
1 | Reset |
2 | USB |
3 | Console |
Port | Description | Connector Type | Speed/Protocol |
---|---|---|---|
Console |
Establish ‘config shell’ terminal session via serial connection |
RJ-45 |
|
USB | USB 2.0 port | USB | Future Use |
Reset |
Reset to factory default settings port. Hold down and power cycle the device to reset. |
Pinhole push button | N/A |
When you reset the AP, the following settings are reset:
- Config shell password is reset to config.
- Server discovery value is erased and changed to the default, redirector.online.spectraguard.net (primary) and wifi-security-server (secondary).
- All the VLAN configurations are lost.
- If a static IP is configured on the AP, the IP address is erased and DHCP mode is set. The factory default IP address of the AP is 169.254.11.74.