Date: May 6th, 2016
|1.0||May 6th, 2016||Initial release|
|1.1||May 12th, 2016||Updated to include assessment for CVX and CVP. Change in vulnerability status for CVE-2016-2107.|
|1.2||May 20th, 2016||Updated to include hotfix to address CVE-2016-2108. Updated the EOS Software versions that are vulnerable to CVE-2016-2108.|
Arista Products vulnerability report for security vulnerabilities announcement from the OpenSSL project on May 3rd, 2016
In May 2016, the OpenSSL project issued a series of security advisories. This advisory reports the vulnerability assessment for Arista products.
Vulnerability report for EOS and CloudVision eXchange (CVX):
EOS and CVX are not affected by the following vulnerabilities:
EOS and CloudVision eXchange are vulnerable to the following:
CVE-2016-2108 (Memory corruption in the ASN.1 encoder):
|Software versions||All EOS releases starting 4.15.0F . The list of affected releases is documented in Table-2.|
|Affected Features||eAPI Client certificate|
|Details||This vulnerability revealed that the ASN.1 parser (specifically, d2i_ASN1_TYPE) can misinterpret a large universal tag as a negative zero value. Large universal tags are not present in any common ASN.1 structures (such as X509) but are accepted as part of ANY structures. Therefore, if an application deserializes untrusted ASN.1 structures containing an ANY field, and later re-serializes them, an attacker may be able to trigger an out-of-bounds write. This has been shown to cause memory corruption that is potentially exploitable with some malloc implementations.|
|Mitigation||To mitigate against this vulnerability do not configure client certificates in eAPI.|
|Resolution||Bug 156374 tracks this vulnerability for EOS. A software fix will be available in upcoming versions for the currently active EOS software trains. This advisory will be updated once the exact SW version is available.|
Patch file download URL: secAdvisory0020.swix
Instructions to install the patch
1. Download the patch file and copy the file to the extension partition of the switch using one of the supported file transfer protocols:
switch#copy scp://10.10.0.1/secAdvisory0020.swix extension: switch#verify /sha512 extension:secAdvisory0020.swix
Verify that the checksum value returned by the above command matches the provided SHA512 checksum for the file
On modular systems with dual supervisors, download the file to the extension partition of the active supervisor and copy it to the standby supervisor using the following two commands:
switch(s1)(config)#copy extension:secAdvisory0020.swix supervisor-peer:/mnt/flash/ switch(s2-standby)#copy flash:secAdvisory0020.swix extension:
2. Install the patch using the extension command. The patch takes effect immediately at the time of installation.
On modular systems with dual supervisors, the patch has to be installed on the active and standby supervisors:
sswitch(s1)#extension secAdvisory0020.swix switch(s2-standby)#extension secAdvisory0020.swix
If eAPI is enabled, the eAPI agent or the uwsgi service will restart after the patch has been installed.
3. Users running eAPI in a VRF namespace will have to cycle nginx to restart the API management service correctly after the patch installation.
switch(config)#management api http-commands switch(config-mgmt-api-http-cmds)#vrf MGMT switch(config-mgmt-api-http-cmds-vrf-MGMT)#shutdown switch(config-mgmt-api-http-cmds-vrf-MGMT)#no shutdown switch(config-mgmt-api-http-cmds-vrf-MGMT)#end
4. Verify that the patch is installed using the following commands:
switch#show extensions Name Version/Release Status extension ------------------------------------------ ------------------------- ------ ---- secAdvisory0020.swix 1.0.0e.Ar/3187103.CVE2016 A, I 1 A: available | NA: not available | I: installed | NI: not installed | F: forced
5. Make the patch persistent across reloads. This ensures that the patch is installed as part of the boot-sequence. The patch will not install on EOS versions with the security fix.
switch#copy installed-extensions boot-extensions switch#show boot-extensions secAdvisory0020.swix
6. For dual supervisor systems run the above copy command on both active and standby supervisors:
switch(s1)#copy installed-extensions boot-extensions switch(s2-standby)#copy installed-extensions to boot-extensions
AFFECTED EOS RELEASES:
Table-2: Affected EOS releases
|* First EOS release to support CloudVision eXchange|
** First EOS release to support eAPI with client certificates
Vulnerability report for CloudVision Portal (CVP)
CloudVision Portal is only affected by the following vulnerabilities:
This is tracked by bug 157236 which will be fixed in release 2016.1.1.
For more information on these vulnerabilities please visit:
For More Information:
If you require further assistance, or if you have any further questions regarding this security notice, please contact the Arista Networks Technical Assistance Center (TAC) by one of the following methods:
Open a Service Request:
By email: firstname.lastname@example.org
By telephone: 408-547-5502