- Written by Christopher Brown
- Posted on 1月 8, 2026
- Updated on 1月 8, 2026
- 205 Views
The aggregate address minimum contributors feature adds the capability to specify a minimum number of contributor routes that must be present and advertisable in order for the BGP speaker to generate the route for the aggregate address.
- Written by Christopher Brown
- Posted on 12月 30, 2021
- Updated on 12月 30, 2021
- 9791 Views
ARP is a protocol that resolves an IPv4 neighbor address to a MAC address while IPv6 Neighbor Discovery is similar
- Written by Christopher Brown
- Posted on 4月 19, 2021
- Updated on 4月 21, 2021
- 10428 Views
RFC4191 describes an optional extension to Router Advertisement messages for communicating default router
- Written by Christopher Brown
- Posted on 12月 16, 2020
- Updated on 3月 7, 2025
- 10260 Views
ARP and IPv6 Neighbor Discovery use a neighbor cache to store neighbor address resolutions. The capacity of the neighbor cache is determined by the resources and capabilities of the device platform. The neighbor cache capacity feature adds a means to specify a per-interface capacity for the neighbor cache. A neighboring device, through misconfiguration or maliciousness, can unfairly use a large number of address resolutions. This feature can help to mitigate this over-utilization.
- Written by Christopher Brown
- Posted on 10月 4, 2019
- Updated on 10月 4, 2019
- 9455 Views
Unequal Cost Multi Path (UCMP) is a mechanism for forwarding traffic for an ECMP route by using a ratio of weights
- Written by Christopher Brown
- Posted on 12月 22, 2017
- Updated on 12月 22, 2017
- 10044 Views
The IPv6 Neighbor Discovery protocol performs Neighbor Unreachability Detection (NUD) in order to determine if two
