- Written by Kaladhar Musunuru
- Posted on 5月 4, 2020
- Updated on 7月 14, 2023
- 7269 Views
This feature introduces support for ACL configuration on VXLAN decapsulated packets. The configured ACL rules will
- Written by Kaladhar Musunuru
- Posted on 5月 4, 2020
- Updated on 8月 16, 2024
- 4356 Views
Ethernet VPN (EVPN) is an extension of the BGP protocol introducing a new address family: L2VPN (address family number 25) / EVPN (subsequent address family number 70). It is used to exchange overlay MAC and IP address reachability information between BGP peers using type-2 routes, but additionally, EVPN supports the exchange of layer 3 IPv4 and IPv6 overlay routes through the extensions described in (type 5 EVPN routes).
- Written by Kaladhar Musunuru
- Posted on 1月 23, 2019
- Updated on 1月 23, 2019
- 5858 Views
This feature provides total ingress MPLS packet and byte counters received per interface. DCS
- Written by Kaladhar Musunuru
- Posted on 5月 17, 2018
- Updated on 5月 17, 2018
- 6209 Views
This feature provides per label ingress packet and byte counters for MPLS routed packets. DCS
- Written by Kaladhar Musunuru
- Posted on 4月 18, 2018
- Updated on 5月 13, 2018
- 6236 Views
This feature provides support for per interface ingress packet and byte counters for both IPv4 and IPv6.
- Written by Kaladhar Musunuru
- Posted on 9月 30, 2015
- Updated on 1月 20, 2023
- 7462 Views
The nexthop group feature allows users to manually configure a set of tunnels. Nexthop group counters provide the ability to count packets and bytes associated with each tunnel nexthop, irrespective of the number of times it appears in one or more nexthop groups. In other words, if a nexthop group entry shares a tunnel resource with another entry, they will also share the same counter.