EOS 4.18.1F TOI

In EOS 4.18.1, support for 25G/50G is added on 7500R, 7280R, 7500R2 and 7280R2 series. This feature provides forced

This article describes a feature for Tap Aggregation mode, which strips IEEE 802.1BR E-Tag and Cisco VN-Tag headers from all tagged packets received on tap interface before delivering them out of tool interfaces.

This feature is provided on all platforms. The BGP listen range command has been modified to optionally allow

The 7500R 8CFPX LC linecard with ACO CFP2 optics provides connectivity over DWDM systems and links. 7500R 8CFPX LC

This feature is an extension to the Explicit Congestion Notification (ECN) functionality for non ECN Capable

The differentiated services code point (DSCP) is a 6 bit field in the IP header, which can be used to mark traffic for

Ethernet VPN (EVPN) is an extension of the BGP protocol introducing a new address family: L2VPN (address family number 25) / EVPN (subsequent address family number 70). It is used to exchange overlay MAC and IP address reachability information between BGP peers within a tunnel

External controllers can communicate with HSC (Hardware Switch Controller) running on CVX/EOS using the OVSDB

The document describes an extension of the decap group feature, that allows IPv6 addresses to be configured and used

This document describes the current status of LANZ on DCS 7500R, DCS 7280R and DCS 7020R, for both polling and

This feature allows the Arista switch to act as the tunnel head for an MPLS tunnel and is exposed through two

This release introduces enhancements to the CloudVision eXchange and OpenStack integration. The following

Overlay IPv6 routing over VXLAN Tunnel is simply routing IPv6 packets in and out of VXLAN Tunnels, similar to

Persistent port security is a feature which ensures that port-security MAC cache is preserved across link flap and system reload. The feature is useful when it is desired to have the same set of already allowed secure MAC addresses on a particular interface after system reload or link flaps. There are separate global configurations to enable persistent port-security for shutdown and protect mode. A command to clear the MAC entries and secure MAC cache for interfaces with port-security configured has been added.

Sampled Mirroring is an extension of the Mirroring feature and sampling is a property of the individual mirroring session: when the session's sample rate N is specified, a packet eligible for mirroring will have a 1/N chance of being mirrored, that is, 1 packet is mirrored for every N packets.

Hardware Table Capacity Monitoring is an existing feature to keep track of the capacity and utilization of various

When configuring or modifying a RACL applied to a VLAN interface, the VLAN will be blocked while applying the updated

DCS 7280E/R series. DCS 7500E/R series. Truncation Size: Truncation size is not available per interface.

This feature was introduced in 4.18.2F. All future releases are expected to support User Defined Fields.

This document describes the truncation capability for Tap Aggregation, which allows tapped traffic to be truncated to a smaller size before being transmitted.

This article describes the TAP Aggregation User Defined Fields feature. The purpose of the User Defined

In EOS 4.18.0F, VXLAN direct routing was introduced on the 7500R and 7280E/R series platforms. VXLAN routing