DMF Controller Nodes
This chapter describes the DMF Controller Nodes available from Arista Networks.
DMF Controller Node (DCA-DM-CDL) Specification
This section describes the LEDs for monitoring environmental and port status on the DMF Controller Node (DCA-DM-CDL).
The DMF Controller Node (DCA-DM-CDL) is an enterprise-class, 2-socket, 1-RU rack-mounted hardware appliance designed to deliver the right combination of performance, redundancy, and value in a high-density chassis.
| 1 | Controller Node security bezel |
| 2 | LCD menu buttons |
| 3 | LCD panel |
| 1 | System identification button / indicator | 5 | Power-on indicator / Power button |
| 2 | Optical drive | 6 | Micro USB (not supported) |
| 3 | Video connector | 7 | Information tag |
| 4 | USB ports | 8 | Hard drives |
| 1 | Serial connector (default baud rate 115200) | 9 | Power supply 2 |
| 2 | iDRAC Ethernet interface | 10 | Power supply 1 |
| 3 | Ethernet connector 1 – Controller Node management port 1 (10/100/1000Mb/s) | 11 | Ethernet connector 2 – Controller Node management port 2 (10/100/1000Mb/s) |
| 4 | Ethernet connector 3 – Not supported | 12 | USB ports |
| 5 | Ethernet connector 4 – 10GbE SFP+ packet capture port | 13 | Video connector |
| 6 | Ethernet connector 5 – Not supported | 14 | System identification button |
| 7 | Ethernet connector 6 – Not supported | 15 | System identification indicator |
| 8 | PSU status indicators |
DMF Controller Node (DCA-DM-CDL(HWDL2)) Specification
This section describes the LEDs for monitoring environmental and port status on the DMF Controller Node (DCA-DM- CDL(HWDL2)).
The DMF Controller Node (DCA-DM-CDL(HWDL2)) is an enterprise-class, 2-socket, 1-RU rack-mounted hardware appliance designed to deliver the right combination of performance, redundancy, and value in a high-density chassis.
| 1 | Controller Node security bezel |
| 2 | LCD menu buttons |
| 3 | LCD panel |
| 1 | System identification button / indicator | 5 | Power-on indicator / Power button |
| 2 | Optical drive | 6 | Micro USB (not supported) |
| 3 | Video connector | 7 | Information tag |
| 4 | USB ports | 8 | Hard drives |
| 1 | Serial connector (default baud rate 115200) | 9 | Power supply 2 |
| 2 | iDRAC Ethernet interface | 10 | Power supply 1 |
| 3 | Ethernet connector 1 – Controller Node management port 1 (10/100/1000Mb/s) | 11 | Ethernet connector 2 – Controller Node management port 2 (10/100/1000Mb/s) |
| 4 | Ethernet connector 3 – Not supported | 12 | USB ports |
| 5 | Ethernet connector 4 – 10GbE SFP+ packet capture port | 13 | Video connector |
| 6 | Ethernet connector 5 – Not supported | 14 | System identification button |
| 7 | Ethernet connector 6 – Not supported | 15 | System identification indicator |
| 8 | PSU status indicators |
DMF Controller Node (DCA-DM-C450) Specification
This section describes the LEDs for monitoring environmental and port status on the DMF Controller Node (DCA-DM-C450).
The DMF Controller Node (DCA-DM-C450) is an enterprise-class, 2-socket, 1-RU rack-mounted hardware appliance designed to deliver the right combination of performance, redundancy, and value in a high-density chassis.
| 1 | Controller Node security bezel |
| 2 | LCD menu buttons |
| 3 | LCD panel |
| 1 | System identification button / indicator | 5 | Micro USB (not supported) |
| 2 | Video connector | 6 | Information tag |
| 3 | USB ports | 7 | Hard drives |
| 4 | Power-on indicator / Power button |
| 1 | Ethernet connector 3 – Not supported | 8 | Power supply 1 |
| 2 | Ethernet connector 4 – 10GbE SFP+ packet capture port | 9 | System identification indicator/button |
| 3 | Serial connector (default baud rate 115200) | 10 | Video connector |
| 4 | Ethernet connector 5 – Not supported | 11 | USB ports |
| 5 | Ethernet connector 6 – Not supported | 12 | iDRAC Ethernet interface |
| 6 | PSU status indicators | 13 | Ethernet connector 2 – Controller Node management port 2 (10/100/1000Mb/s) |
| 7 | Power supply 2 | 14 | Ethernet connector 1 – Controller Node management port 1 (10/100/1000Mb/s) |
DMF Controller Node (DCA-DM-C660) Specification
This section describes the LEDs for monitoring environmental and port status on the DMF Controller Node (DCA-DM-C660).
The DMF Controller Node (DCA-DM-C660) is an enterprise-class, 2-socket, 1-RU rack-mounted hardware appliance designed to deliver the right combination of performance, redundancy, and value in a high-density chassis.
| 1 | Controller Node security bezel |
| 2 | LCD menu buttons |
| 3 | LCD panel |
| 1 | System identification button / indicator | 4 | Information tag |
| 2 | Video connector | 5 | Hard Drives |
| 3 | Power-on indicator / Power button |
| 1 | Ethernet connector 3- 10/25GbE SFP28 packet capture | 7 | Video connector |
| 2 | Ethernet connector 4 – Not Supported | 8 | USB ports |
| 3 | Serial connector (default baud rate 115200) | 9 | iDRAC Ethernet interface |
| 4 | Power supply 1 | 10 | Ethernet connector 1 – Controller Node management port 1 (10/100/1000Mb/s) |
| 5 | Power supply 2 | 11 | Ethernet connector 2 – Controller Node management port 2 (10/100/1000Mb/s) |
| 6 | System identification indicator/button |
LEDs and Indicators
The following table lists the meaning of each LED or other indicator.
| Indicator, Button, or Connector | Description | |
|---|---|---|
| Power-on indicator | Green: System power is on | |
| Off: System power is off | ||
| System identification indicator in front panel | Off: Normal operating conditions | |
| Blue blinking: Activates system identification | ||
| System identification indicator in rear panel | Blue: Normal operation condition | |
| Blue blinking: Activates system identification | ||
| Amber blinking: Fault detected with error code followed by descriptive text in LCD panel | ||
| 10/100/1000Mbps Ethernet connector 1, 2 | Link indicator | Green: Establishes a valid 1000Mb/s network link |
| Amber: Establishes a valid 10/100Mb/s network link | ||
| Off: Link is down | ||
| Activity indicator | Green blinking: Sends or receives Network data | |
| Off: No link activity | ||
| 10G SFP+ Ethernet connector 4 | Link indicator | Green: Establishes a valid 10G network link |
| Off: Link is down | ||
| Activity indicator | Green blinking: Sends or receives Network data | |
| Off: No link activity | ||
| Power supply status | Green: The power supply has a valid power source andis operational. | |
| Amber blinking: Indicates a problem with the power supply | ||
| Off: Power is off | ||
Platform Management Tool
DMF Controller Node (DCA-DM-C660) supports iDRAC 9 platform management tools.
- iDRAC 9 supported features: remote power management, virtual console.
Technical Specification
| Controller Node | DCA-DM-C660 |
|---|---|
| Processor | 2 X Intel Xeon Silver 4410Y 2GHz, 12 cores, 24 threads, 16GT/s30M cache, turbo, HT, 150W, DDR5-4000, OEM XL |
| Form Factor (H X W X D) | 1-RU Rack server (4.28cm x 43.4cm x 69.3cm) |
| Memory | 4 X 16GB RDIMM, 5600MT/s, Single Rank |
| Hard drive | 2 X 2TB Hard Drive SATA 6Gbps 7.2K 512n 3.5in Hot-Plug |
| Networking | Embedded NIC: Integrated Dual 1GbE LOM (BCM5720)
Network adapter 1: Intel E810-XXV dual port 10/25GbE SFP28 adapter , PCIe Low Profile |
| Power | 2 X Dual, Redundant(1+1), Hot-Plug Power Supply,1100W MM(100- 240Vac) Titanium |
| Additional features | Fan fault tolerance; ECC memory; interactive LCD screen; ENERGY STAR® compliant |
| Environment | Specification |
|---|---|
| Temperature – Continuous | 5°C to 40°C (41°F to 104°F) with no direct sunlight on the equipment |
| Temperature - Storage | -40°C to 65°C (-40°F to 149°F) with a maximum temperature gradation of 20°C per hour |
| Relative humidity – Continuous | 5% to 85% with 29°C (84.2°F) maximum dew point |
| Relative humidity – Storage | 5% to 95% at a maximum wet bulb temperature of 33°C (91°F), atmosphere must be non-condensing at all times |
| Altitude – Continuous | 3048m (10,000ft) |
| Altitude – Storage | 12,000m (39,370ft) |