Application Setup
This chapter contains the following topics:
Setting Up DMF Recorder Node
Pre-installation Checklist
- Ensure that the installation prerequisites are satisfied, as mentioned in the DMF Recorder Node Installation prerequisites section of the DMF Deployment Guide.
- To set up the Recorder Node appliance, please refer to Installing and Upgrading the DMF Recorder Node section of the DMF Deployment Guide.
Log into the DMF Recorder Node Web Interface
After the Recorder Node has been connected to the DMF switch fabric and configured (as per the steps outlined in the DMF Deployment Guide), enter the DMF Controller GUI via its IP/Hostname. The Recorder Node should be displayed as connected in the Managed Services page of the DMF GUI.
Refer to the DMF User Guide for instructions on using the DMF Recorder Node appliance.