Installing the Edge Appliance
The Edge appliance can be placed on a table or a flat surface, or it can be mounted on the wall. The appliance comes with the feet attached. Place it on a flat surface, plug it into a power source, and it's ready to be activated.
Wall Mount the Edge Appliance
Follow these steps to wall mount the appliance:
Note: If your appliance supports an external antenna (for example, Edge 710-5G), wall mount the appliance first before attaching the antennas.
- Loosen the screws from all four feet of the Edge appliance and remove them. Retain the screws as you will need them later.
- Align the wall mount bracket on the appliance such that the holes on the appliance align with the holes on the bracket.
Figure 1. Wall Mount Bracket 
- Use the same screws to tighten the bracket.