Total 50 results found for the keyword of "eos section 10 6 ethernet configuration commands"
... this example, eos sends hello messages to all known neighbors every
10 seconds. If the switch does not receive
hello responsesfrom a neighbor for 4*10=40 seconds, the switch loses
communication and the ...
... eos Release 4.22.0F, the EVPN VXLAN L3 Gateway using EVPN IRB
supports routing traffic from one IPv6 host to another IPv6 host on a stretched VXLAN
VLAN.
IP VPNs Sample configuration
Here, we examine ...
EVPN and VCS commands
Global configuration Mode
router
general
Router BGP configuration Mode
next-hop
resolution disabled
redistribute
service vxlan
route-target
route-target
export
route-target ...
...
VXLAN Decapsulation for interface with multiple VRFs
Please refer to the following security advisory after the eos software upgrade for a
network that leverages VXLAN decapsulation on an interface ...
VXLAN commands
VXLAN Global configuration
commands
interface vxlan
ip address virtual
vxlan vni notation
dotted
VXLAN Interface configuration
commands
vxlan flood vtep
vxlan multicast-group ...
ethernet VPN (EVPN)
This chapter describes the Arista EVPN implementation. sections in this chapter
include the following topics:
EVPN Overview
EVPN Layer
3 Core Operations
Integrated Routing and ...
... command for shutting down the Tx output path for unidirectional
mode.
1-second update of pre-FEC BER, OSNR, ESNR.
400GBASE-ZR transceiver with Open Forward Error Correction (O-FEC) (eos
release 4.25.2F.) ...
Precision Time Protocol (PTP) commands
PTP commands
ptp announce interval
ptp announce timeout
ptp delay-mechanism
ptp delay-req interval
ptp domain
ptp enable
ptp forward-v1
ptp hold-ptp-time ...
Environment commands
Environment Control
configuration commands
environment fan-speed
environment insufficient-fans action
environment overheat action
locator-led
Environment Display
commands ...
7130 Layer 1 commands
Layer 1 configuration commands
l1 source
Layer 1 Show commands
show l1 destination
show l1 matrix
show l1 path
show l1 source
show l1 source
capabilities
l1 ...
Session Management commands
Global configuration commands
commit timer
configure replace
configure session
management api eos-sdk-rpc
management api external-services
management api gnmi
management ...
...
Note: In eos releases prior to 4.23.2, this command identified system peers
with IPv6 addresses by their reference IDs (the first four octets of the MD5 hash of
the IPv6 address). In later releases, ...
... Ratio, Residual Inter Symbol Interference, PAM4 Level
Transition Parameters, and other parameters supported on optics interfaces.
Using the Performance Monitoring feature allows eos to collect and maintain ...
... clusters. This means the directly connected
TaskTracker nodes can belong to different clusters. eos supports a maximum of five
clusters per switch.
MapReduce Tracer configuration
The MapReduce Tracer ...
VM Tracer
This chapter describes VM Tracer configuration and usage and contains these sections:
Introducing VM Tracer
VM Tracer Description
VM Tracer configuration Procedures
VM Tracer ...
... manager can request or change. The agent gathers data from the MIB and responds to requests for information. For a list of supported MIBs, refer to the release notes for the specific eos version.
This ...
Configuring RSVP-TE
The configuration of RSVP-TE requires the configuration of one or more of the following:
Configuring RSVP-TE LER
Configuring RSVP-TELSR
Configuring RSVP-TE P2MP LER ...
... timestamp
Drop count
Device ID
Egress
interface
FCS type
Reserved
TAP Aggregation Extra MPLS Pop (4 to 6 Labels)
Available starting with eos Release 4.23.1F extra MPLS pop for TAP
Aggregation ...
...
sFlow exports packet samples and topology meta data to a centralized collector
application.
sFlow scales and operates on all switch ports simultaneously.
eos implements sFlow on all switches, without ...
Latency Analyzer (LANZ)
Arista Networks’ Latency Analyzer (LANZ) is a family of eos features that provide enhanced
visibility into network dynamics, particularly in areas related to the delay packets
experience ...