Total 4 results found for the keyword of "wap c130 connect access point to the network"
Wi-Fi access point C-130 - connect C-130 to the network
connect C-130 to the network the device can be connected to the network by connecting through a LAN cable or a POE+ injector. If you are using a PoE+ injector, make sure the data connection is plugged ...
Wi-Fi access point C-130 - Power on the C-130
Power on the C-130 the C-130 device can be powered on by plugging one end of the Ethernet cable into the PoE+ (802.3at) switch or injector and the other end into the Ethernet/PoE+ port on the C-130. ...
Wi-Fi access point C-130 - Install the C-130
Install the C-130 This chapter contains the step wise procedure to install the C-130 device. Zero-Configuration of C-130 as access point Zero-configuration is supported under the following ...
Wi-Fi access point C-130 - C-130 Troubleshooting
C-130 Troubleshooting the table below lists some of the troubleshooting guidelines for the access point (AP).   Problem Solution the AP did not receive a valid IP address via the ...