Total 50 results found for the keyword of "eos 10 6 ethernet configuration commands"
...  show traffic-engineering database Use the show traffic-engineering database to display the topology used for CSPF computations. Starting from eos Release 4.23.1F, the SRLG group details of a neighbor ...
Sample configurations EVPN VXLAN IRB Sample configuration In the topology below, we are connecting a Layer 2 site with a Layer 3 site using Layer 3 EVPN (type-5 route). Right side leaves are MLAG ...
EVPN and VCS commands Global configuration Mode router general Router BGP configuration Mode next-hop resolution disabled redistribute service vxlan route-target route-target export route-target ...
VXLAN commands VXLAN Global configuration commands interface vxlan ip address virtual vxlan vni notation dotted VXLAN Interface configuration commands vxlan flood vtep vxlan multicast-group ...
ethernet VPN (EVPN) This chapter describes Arista’s EVPN implementation. Sections in this chapter include: EVPN Overview EVPN Layer 3 Core Operations Integrated Routing and Bridging VPN MPLS Transport ...
... identifier or a single Customer Edge (CE) to the participating multiple Provider Edge (PE). The default mode of operation is All-active. Introduced in the eos 4.26.0F for VxLAN, singe-active is another ...
... (eos release 4.25.2F) Support of 400GBASE-ZR with Open Forward Error Correction (O-FEC) (eos release 4.25.2F) Override a transceiver slot’s maximum power limit (eos release 4.25.2F) Platform Compatibility ...
Precision Time Protocol (PTP) commands PTP commands ptp announce interval ptp announce timeout ptp delay-mechanism ptp delay-req interval ptp domain ptp enable ptp forward-v1 ptp hold-ptp-time ...
Environment commands Environment Control configuration commands environment fan-speed environment insufficient-fans action environment overheat action locator-led Environment Display commands ...
... command replaces the EOS CLI prompt with an SQLite prompt.switch# event-monitor interact sqlite> This command exits SQLite and returns to the EOS CLI prompt.sqlite> .quit switch# event-monitor ...
Session Management commands Global configuration commands configure replace configure session management api eos-sdk-rpc management api external-services management api gnmi management api gnsi ...
...  Drop count Device ID Egress interface FCS type Reserved TAP Aggregation Extra MPLS Pop (4 to 6 Labels) Available starting with eos Release 4.23.1F extra MPLS pop for TAP Aggregation ...
Latency Analyzer (LANZ) Arista Networks’ Latency Analyzer (LANZ) is a family of eos features that provide enhanced visibility into network dynamics, particularly in areas related to the delay packets experience ...
... displays information about the active flows maintained in the eos. Command Mode EXEC Command Syntax show flow tracking sampled flow-table [ detail | dst-ip | dst-port | group | interface | protocol ...
... available for other eos applications. With hardware acceleration, all sFlow processing is done in hardware using specialized chips, called accelerators. These accelerators process sampled packets and ...
... can request or change. The agent gathers data from the MIB and responds to requests for information. For a list of supported MIBs, refer to the release notes for the specific eos version. This chapter ...
VM Tracer This chapter describes VM Tracer configuration and usage and contains these sections: VM Tracer Introduction VM Tracer Description VM Tracer configuration Procedures VM Tracer commands ...
... leaks in eos or customer user processes. Process leaks to too many processes or scripts running at one time. Over configuration of the system requiring more memory than available. Large number of temporary ...
... like Signal-To-Noise Ratio, Residual Inter Symbol Interference, PAM4 Level Transition Parameters, etc. that such optics support. With Performance Monitoring feature eos collects and maintains certain ...
...  Starting in Release eos 4.23.1, ingress on inner IP header matching in MPLS packets is also supported on PBR ACLs. In order to enable this, the following must be configured in a user-defined TCAM profile: ...