Total 12 results found for the keyword of "eos section 39 6 igmp and igmp snooping commands"
igmp and igmp snooping igmp snooping igmp Host Proxy Description Supported Features igmp Protocols Configuring igmp Configuring igmp snooping igmp Host Proxy igmp and igmp snooping Commands ...
... command replaces the EOS CLI prompt with an SQLite prompt.switch# event-monitor interact sqlite> This command exits SQLite and returns to the EOS CLI prompt.sqlite> .quit switch# event-monitor ...
...  Drop count Device ID Egress interface FCS type Reserved TAP Aggregation Extra MPLS Pop (4 to 6 Labels) Available starting with eos Release 4.23.1F extra MPLS pop for TAP Aggregation ...
... is the protocol used to manage the membership of hosts in multicast groups for IPv6. RFC 3810 talks about MLDv2 functionality. MLDv2 is the IPv6 counterpart of igmpv3. Beginning with eos Release 4.25.0F, ...
Protocol Independent Multicast Protocol Independent Multicast (PIM) distributes multicast data using routes gathered by other protocols. Arista switches support two types of PIM: PIM Sparse Mode ...
... snooping is a Layer 2 feature that is configured on LAN switches. The Arista eos switch supports Option-37 insertion that allows relay agents to provide remote-id information in DHCP request packets. DHCP servers ...
... and destination addresses.. ACLs can also be made dynamic (not persisting in the eos), and the payload keyword can be used to turn an ACL into a User-Defined Field (UDF) alias for use in other ACLs. ...
... that are configured by a custom agent using the eos SDK or eAPI and age out (expire) after a specified time period. For example, if you are using a custom agent that reacts to traffic sent to the CPU ...
... Configuration Procedures VLAN Configuration Commands VLAN Introduction Arista switches support industry standard 802.1q VLANs. Arista eos provides tools to manage and extend VLANs throughout the ...
... VOQ0 are in WRR with a static credit ratio 2:3:6 (higher ratio implies more credits). The subinterface inherits the trust mode of the parent interface. Before eos Release 4.24.2F, shaping is supported ...
... MLAG peer switches are identical platforms and run identical eos images. Running different images/platform may result in a failure to form an association with the MLAG peer or see discrepancy in behavior. ...
Event Monitor The event monitor writes system event records to local files for access by SQLite database commands. Note: Beginning with release eos-4.20.5F, event-monitor is not enabled by default. Use ...