Total 13 results found for the keyword of "eos section 6 6 aboot configuration commands"
... password from the encrypted string. If the
clear-text password is lost, delete the corresponding
PASSWORD command line from the
boot-config file.
Note: The eos boot secret command is the recommended method ...
Session Management commands
Global configuration commands
configure replace
configure session
management api eos-sdk-rpc
management api external-services
management api gnmi
management api gnsi ...
... have not been saved since
the last boot.
boot-config
The boot-config file is an ASCII file that aboot uses to configure console
communication settings, locate the eos flash image, and specify
initial ...
... Operation
When the switch is powered on or rebooted, aboot reads its configuration from
boot-config on the internal flash and attempts
to boot an eos software image (with the extension
.swi) automatically ...
... 1
stop bit. If you do not know the current settings, restore the factory-default
settings as described in Restoring the Factory Default eos Image and Startup configuration.
The no boot console and default ...
... distributes operational state information across a set of eos switches to support applications that provide network services. See the CloudVision User Guide, https://www.arista.com/en/support/product-documentation, ...
... the eos image with Smart System
Upgrade
Using SSU to upgrade the active eos image is a five-step process:
Prepare switch for upgrade ( Prepare the Switch for SSU).
Transfer image file to the switch ...
Standard Upgrades and Downgrades
Standard software upgrades
and downgrades on Arista switches are accomplished by installing a different
eos image and reloading the switch. On switches with redundant ...
... validating the eos image on your ZTP server by confirming
that its MD5 checksum matches the MD5 checksum that can be found on the
eos download page of the Arista website.
On a UNIX server, the md5sum ...
...
Restoring the Factory Default eos Image and Startup configuration
USB Support for ZeroTouch Provisioning
Restoring the configuration and Image from a USB Flash Drive
The first three procedures require ...
... CLI.
This chapter includes these sections:
Accessing the eos CLI
Processing commands
Kernel-based Virtual Machine commands and configuration
Switch Platforms
Command Modes
Managing Switch
configuration ...
Booting the Switch
This chapter describes the
switch boot process, describes configuration options, and lists the components
it requires, including the boot loader, the boot loader shell, and other
configuration ...
... system
aboot 1.9.0-52504.eos2.0
Press Control-C now to enter aboot shell
To continue the reload process, do nothing. Typing Ctrl-C opens the
aboot shell; see aboot commands
for aboot editing ...