Total 7 results found for the keyword of "eos smart system upgrade ssu"
... the eos image with smart system
upgrade
Using ssu to upgrade the active eos image is a five-step process:
Prepare switch for upgrade ( Prepare the Switch for ssu).
Transfer image file to the switch ...
upgrade/Downgrade Overview
Upgrading or downgrading the Arista Extensible Operating system (eos) is accomplished by
replacing the eos image and reloading the switch. Depending on
the switch model and ...
Standard upgrades and Downgrades
Standard software upgrades
and downgrades on Arista switches are accomplished by installing a different
eos image and reloading the switch. On switches with redundant ...
upgrade/Downgrade Commands
install
reload fast-boot
reload hitless
install
The install
command copies the specified eos image onto the switch (if the source is
external), configures the ...
...
Note: Unlike node segments, anycast segments do not have the ‘N’ flag set described in section 2.1.1.2 of RFC8667.
The following enhancements are available by release:
eos Release 4.22.1F adds support ...
... ensure disable-vrf configuration to take effect.
switch(config)# agent SandL3Unicast terminate
SandL3Unicast was terminated
Starting from the eos Release 4.26.0F, /32 prefix length optimization ...
... 1
stop bit. If you do not know the current settings, restore the factory-default
settings as described in Restoring the Factory Default eos Image and Startup Configuration.
The no boot console and default ...