This feature introduces support for ACL configuration on VXLAN decapsulated packets. The configured ACL rules will

Ethernet VPN (EVPN) is an extension of the BGP protocol introducing a new address family: L2VPN (address family number 25) / EVPN (subsequent address family number 70). It is used to exchange overlay MAC and IP address reachability information between BGP peers using type-2 routes, but additionally,  EVPN supports the exchange of layer 3 IPv4 and IPv6 overlay routes through the extensions described in (type 5 EVPN routes).

This feature provides total ingress MPLS packet and byte counters received per interface. DCS

This feature provides per label ingress packet and byte counters for MPLS routed packets. DCS

This feature provides support for per interface ingress packet and byte counters for both IPv4 and IPv6.

The nexthop group feature allows users to manually configure a set of tunnels. Nexthop group counters provide the ability to count packets and bytes associated with each tunnel nexthop, irrespective of the number of times it appears in one or more nexthop groups. In other words, if a nexthop group entry shares a tunnel resource with another entry, they will also share the same counter.