Total 20 results found for the keyword of "eos show l1 source capabilities"
...
sFlow exports packet samples and topology meta data to a centralized collector
application.
sFlow scales and operates on all switch ports simultaneously.
eos implements sFlow on all switches, without ...
Latency Analyzer (LANZ)
Arista Networks’ Latency Analyzer (LANZ) is a family of eos features that provide enhanced
visibility into network dynamics, particularly in areas related to the delay packets
experience ...
LDP over RSVP
LSPs formed by LDP normally follow IGP routing. The LDP speaker selects the downstream
LSR for a particular prefix as the LDP peer that advertises it with the best IGP metric
using ...
... eos Release 4.22.0F, the EVPN VXLAN L3 Gateway using EVPN IRB
supports routing traffic from one IPv6 host to another IPv6 host on a stretched VXLAN
VLAN.
IP VPNs Sample Configuration
Here, we examine ...
... list, or profile, of resolution RIB domains (for example, either tunnel or IP domain). This allows eos to direct specific services over the specified RIB domains, overriding the default behavior. Further, ...
... in
section 2.1.1.2 of RFC8667.
The following enhancements are available by release:
eos Release 4.22.1F adds support for TI-LFA backup paths that protect IS-IS SR labeled traffic corresponding to a ...
Decap Groups
These sections describe the Decap Groups features:
Decap Groups Overview
Configuring Decap Groups
Configuring Generic UDP Encapsulation (GUE) Decap Groups
Decap Groups Commands
...
... that are configured by a custom agent using the eos SDK or eAPI
and age out (expire) after a specified time period.
For example, if you are using a custom agent that reacts to traffic sent to the CPU ...
VRRP and VARP
A virtual IP (VIP) address
is an IP address that does not directly connect to a specific interface.
Inbound packets sent to a Virtual IP address are redirected to a physical
network ...
... arp 172.22.30.52 0025.900e.c63c arpa
switch(config)#
The arp proxy
max-delay command enables delaying proxy ARP
requests on the configuration mode interface. eos disables Proxy ARP by
default. When ...
IP Address Locking
eos provides IP Address Locking capabilities when configured on an Ethernet Layer 2
port.
After enabling IP Address Locking on a Layer 2 (L2) port, the port only permits IP and
ARP ...
... management 1
Local System:
- Chassis ID type: MAC address (4)
Chassis ID : 001c.730f.11a8
- System Name: "switch.aristanetworks.com"
- System Description: "Arista Networks eos version 4.13.2F ...
... (also configured as a dynamic LAG) on the partner switch. The maximum number of ports per LAG varies by platform; numbers for each platform in the latest eos release are available here: https://www.arista.com/en/support/product-documentation/supported-features. ...
... command for shutting down the Tx output path for unidirectional
mode.
1-second update of pre-FEC BER, OSNR, ESNR.
400GBASE-ZR transceiver with Open Forward Error Correction (O-FEC) (eos
release 4.25.2F.) ...
Quality of Service
This chapter describes the eos Quality of Service (QoS) implementation, including configuration instructions and command descriptions. Topics covered by this chapter include ...
... the successor to Secure Sockets Layer (SSL), is a security protocol used to communicate between client and server. It establishes an encrypted communication channel to secure data.
By default, eos uses ...
... control access to eos commands. Three data services conduct authentication, authorization, and accounting (AAA) activities: a local security database, TACACS+ servers, and RADIUS servers.
The Configuring ...
7130 Layer 1 Commands
Layer 1 Configuration Commands
l1 source
Layer 1 show Commands
show l1 destination
show l1 matrix
show l1 path
show l1 source
show l1 source
capabilities
l1 ...
7130 Platform Layer 1 Configuration
This section describes the purpose, behavior, and configuration of the 7130 platform and includes the following topics:
Configuring Layer 1 on 7130 Platform
Interface
Addressing ...
... CLI.
This chapter includes these sections:
Accessing the eos CLI
Processing Commands
Kernel-based Virtual Machine Commands and Configuration
Switch Platforms
Command Modes
Managing Switch
Configuration ...