Print

VeloCloud SD-WAN 7.0.1 - Administration Guide - Whats New Print

What's New

Table 1. What's New in Version 7.0.1
Feature Description
Cluster Hop Count With this feature, the LAN-side router in a Cluster selects the appropriate Cluster member to forward traffic to a Spoke following the path with least Cluster hop count. For more information, see Hub or Cluster Interconnect.
Configure Anti-replay Protection

This feature provides Anti-Replay configuration selection as part of Generic IKEv2 Router NSD via Edge tunnel setup. This applies to both Primary and Secondary VPN Gateways setup. For more information, see Configure a Non SD-WAN Site of the Type Generic IKEv2 Router via Edge.
eDBA Extension for Private links

This feature extends the current eDBAfeature to support the following deployment scenarios:

  • Allow Private links to use eDBA. For eDBA-enabled private links, support is added to enforce link-level bandwidth adjustment to each path.

  • Allows eDBA to function on the varying low-bandwidth and long-delay GEO and LEO satellite links.

For more information, see Configure Edge WAN Overlay Settings.
Hitless Gateway Migration This feature enables migration of Edges and Non-SD-WAN Destinations (NSDs) from a Gateway to another Gateway with minimal to no network downtime. For more information, see NSD Portability Conversion.
Internal Static NAT for LAN-LAN This feature enables LAN-to-LAN NAT. This allows the VeloCloud Edge to perform inter-LAN NAT between LAN networks, keeping traffic within the Edge. For more information, see:
Link Insights - Phase 2 This feature enhancement introduces a status change and flap timeline to help track a link’s last known state and review detailed flap history over any chosen time interval. It also enables uptime calculation and detects sustained link instability on WAN-facing links and surfaces it as an event on the Orchestrator, without reacting to transient glitches or single bounces. For more information, see
Routing Remote Actions This feature allows remote reset of a BGP session while it is in the 'Established' state. For more information, see the Routing Remote Actions topic of the VeloCloud SD-WAN Troubleshooting Guide.
SSE Support for Netskope VeloCloud offers Security Service Edge (SSE) support for Netskope, enabling an Enterprise customer to automate IPSec tunnel creation from the VeloCloud Edge to the Netskope VPN Gateway. For more information, see the Arista VeloCloud SD-WAN Configuration Guide SSE for Netskope.
Support for Enterprise-level Edge Certificate Renewable Configurations

This feature enables Enterprise-level configuration of Edge certificate renewals, addressing issues in which global settings caused simultaneous renewals and service disruptions. For more information, see Edge Management.
Support for FIPS 140-3 on Edge Platforms This feature enables Enterprise Administrators to activate FIPS 140‑3 mode at the Enterprise, Profile, and Edge level after performing the following specific validations:
  • The Diffie–Hellman (DH) Group and Perfect Forward Secrecy (PFS) in the Customer Security Policy IPsec configuration are set to 14 and higher.
  • The Enterprise does not have ENTERPRISE_EXPORT_RESTRICTION_ENABLED set to True.
  • The Edge software version is 7.0.1 and higher.
  • The NSDs via Edge associated with the Edge or Profile have a DH Group/PFS of 14 or higher.
For more information, see:
SFP Visibility The SFP Visibility feature provides real-time SFP/SFP+ data directly accessible from the VeloCloud Orchestrator (VCO) management interface and via remote diagnostics on the Edge. For more information, see: .
VeloBrain Diagnostic Bundle Insights Assistant The Diagnostic Bundle Insights (DBI) Assistant feature in VeloBrain analyzes complex system diagnostic files to provide clear and direct results. For more information, see
WPA3 Wireless Authentication Support VeloCloud supports WPA3 capability on the 610 and 710 Edge models. For more information, see Configure Interface Settings for Profiles.

Release Notes

For information on all the Resolved and Known issues for 7.0.1, see VeloCloud SD-WAN 7.0.1 Release Notes.

..