View both real time and historical interface statistics data, on the Monitor > Edges > System > Interface screen of the Orchestrator. This feature allows you to monitor data at the interface level.
To access the network interface stats, in the Partner portal, navigate to Monitor > Edges > System. On the System tab, you see System Overview selected by default. Select Interface to view the interface statistics (stats) information.
Figure 1. Monitor Network Interface Statistics
There are two modes available:
Non-Live Mode:
The non-live mode activates by default.
Displays historical stats of an interface. Customers can view all the previously captured data.
Both Active and HA Standby Edges support this mode.
Live Mode:
To view real time interface stats, activate Live Mode to ON.
Only Active Edges support this mode.
The table below the graphs displays the following information:
Table 1. Monitor Network Interface Statistics - Options and Descriptions
Option
Description
Interface
Displays the interface name as GE, Loopback, or SFPs.
Status
Displays the status of the interface.
Link Type
Displays the type of the link, for example, LAN, WAN, HA.
Packet Drop
Displays the packet drop details.
Segment
Displays the segment name.
Interface Type
Displays the interface type, and the corresponding details depending on the type.
Routed - IP Address, WAN Link, IP Version, Link Type.
Switched - Mode, VLANs.
The following table lists the interface mappings:
Table 2. Interface Mappings
Interface Type
Interface is used for
Switched
LAN, HA
Loopback
N/A
Routed
WAN, none
Total Bytes
Displays the total number of bytes.
Bytes Received
Displays the number of bytes received.
Bytes Sent
Displays the number of bytes sent.
Note: Select the interface to activate live mode for any selected interface. You can view up to four interfaces in the live mode.
Select Columns to hide or view the required columns. Select Refresh to view the latest data.
