打印

Overview

 

The Arista Network Detection and Response (NDR), previously known as Awake Security, operates on a physical appliance or a combination of physical and virtual appliances. The hardware can be purchased using a Stock Keeping Unit (SKU) with the Data Center Automation (DCA) prefix, formatted as DCA-NDR-XY. In this format, "X" represents the type of appliance: A (All-in-One), NB (Nucleus), CC (Central Console), or S (Sensor). The letter "Y" indicates the maximum Gb/s rate, which currently can be 100MB, 1GB, 5GB, 10GB, or 40GB.

Each type of appliance has unique characteristics, so identify the correct appliance (All-in-one, Nucleus, Central Console, Storage, or Sensor) for its function before starting the installation tasks.

Scope

 

This guide is intended for trained service personnel and technicians who need to install and configure Arista NDR appliances with the specified SKU format:

  • DCA-NDR-S100MB, 1RU Sensor Appliance
  • DCA-NDR-S1, 1RU Sensor Appliance
  • DCA-NDR-S5, 2RU Sensor Appliance
  • DCA-NDR-S10, 2RU Sensor Appliance
  • DCA-NDR-S40, 1RU Sensor Appliance
  • DCA-NDR-STR, 4RU Storage Appliance (Optional with DCA-NDR-S40)
  • DCA-NDR-NB10, 2RU Nucleus Appliance
  • DCA-NDR-CC, 2RU Central Console Appliance
  • DCA-NDR-A5, 2RU All-in-One Appliance

 

Warning:

Only qualified personnel should install, service, or replace this equipment.

 

Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.

 

Receiving and Inspecting the Equipment

 

When you receive the Arista NDR appliance(s), inspect the shipping boxes for any external damage. If you believe any part of the shipment is damaged, keep the packing materials, as the carrier may need to inspect them.

If the boxes arrived undamaged, unpack them with care. Do not discard any accessories that may have been included with the main unit.

Review the packing list and verify that you received all items listed. Cross-check the packing list with your purchase order. Appendix B contains a list of components included with the Arista NDR appliance.

Installation Process

 

The following tasks are required to install and use the Arista NDR appliance:
  1. Select and prepare the installation site (Site Selection).
  2. Assemble the installation tools (Tools and Parts Required for Installation).
  3. Attach the mounting brackets and install the Arista NDR appliance in an equipment rack (Rack Mounting an Arista NDR Appliance).
  4. Connect the Arista NDR appliance to the power source and network devices (Cabling the Appliance).
  5. Configure the Arista NDR appliance (Configuring the Appliance).
     
    Warning:

    Class 1 Laser Product: This product has provisions to install Class 1 laser transceivers which provide optical coupling to the communication network. Once a Class 1 laser product is installed, the equipment is a Class 1 Laser Product (Appareil à Laser de Classe 1). The customer is responsible for selecting and installing the Class 1 laser transceiver and for insuring that the Class 1 AEL (Allowable Emission Limit) per EN/IEC 60825, CSA E60825-1, and Code of Federal Regulations 21 CFR 1040 is not exceeded after the laser transceiver have been installed. Do not install laser products whose class rating is greater than 1. Refer to all safety instructions that accompanied the transceiver prior to installation. Only Class 1 laser devices, certified for use in the country of installation by the cognizant agency are to be utilized in this product.

     

    Produit Laser de classe 1: Ce produit a des dispositions pour installer des émetteurs-récepteurs de laser de classe 1 qui offre de couplage au réseau de communication optique.Une fois un produit laser de classe 1 est installé, l'équipement est un produit Laser de classe 1 (Appareil à Laser de Classe 1).Le client est responsable pour sélectionner et installer l'émetteur/récepteur de laser de classe 1 et pour assurer que la classe 1 AEL (limite d'émission admissible) par EN/IEC 6-825, CSA E60825-1, et Code des règlements fédéraux 21 CFR 1040 ne soit pas dépassée après avoir installé l'émetteur/récepteur de laser. Ne pas installer des appareils à laser dont la cote de classe est supérieure à 1.Voir toutes les consignes de sécurité qui ont accompagné l'émetteur-récepteur avant l'installation. Seuls appareils laser de classe 1 certifiés pour une utilisation dans le pays d’installation par l’organisme compétent doivent être utilisées dans ce produit.Ultimate disposal of this product should be in accordance with all applicable laws and regulations.

     

     

    Warning:

    Ultimate disposal of this product should be handled in accordance with all national laws and regulations.

     

    Aucune pièce réparable par l'utilisateur à l'intérieur. Confiez toute réparation à un technicien qualifié.

     

Obtaining Technical Assistance

 

Any customer, partner, reseller, or distributor holding a valid Arista Service Contract can obtain technical support in any of the following ways:

  • Email: 该邮件地址已受到反垃圾邮件插件保护。要显示它需要在浏览器中启用 JavaScript。.

    This is the easiest way to create a new service request. Include a detailed description of the problem.

     

  • Web: https://www.arista.com/en/support

    You can create a support case through the support portal on our website. You can also download the most current software and documentation, as well as view FAQs, Knowledge Base articles, Security Advisories, and Field Notices.

     

  • Phone: +1 866-476-0000 or +1 408-547-5502.

     

 

Warning:

No user-serviceable parts inside. Refer all servicing to qualified service personnel.

 

Aucune pièce réparable par l'utilisateur à l'intérieur. Confiez toute réparation à un technicien qualifié.

 

Specifications

 

Table 1. Arista NDR appliance Specifications (RUs, Dimensions, and Weight)
Arista NDR appliance SKU Rack Units (RUs) Dimensions (W x H x D) Weight
DCA-NDR-S100MB 1 43.7 x 4.3 x 65.0 cm

(17.2 x 1.7 x 25.6 in)

20.87 kg

(46 lbs)

DCA-NDR-S1 1 43.7 x 4.3 x 65.0 cm

(17.2 x 1.7 x 25.6 in)

20.87 kg

(46 lbs)

DCA-NDR-S5 2 43.7 x 89.0 x 72.3 cm

(17.2 x 3.5 x 28.5 in)

32.7 kg

(72.0 lbs)

DCA-NDR-S10 2 43.7 x 89.0 x 72.3 cm

(17.2 x 3.5 x 28.5 in)

32.7 kg

(72.0 lbs)

DCA-NDR-S40 1 43.4 x 4.2 x 35.8 cm

(17.08 x 1.6 x 14 in)

15.8 kg

(34.83 lbs)

DCA-NDR-STR 4 42.3 x 17.43 x 87.5 cm

(16.65 x 6.86 x 34.45 in)

29.20 kg

(64.37 lbs)

DCA-NDR-NB10 2 43.7 x 89.0 x 72.3 cm

(17.2 x 3.5 x 28.5 in)

32.7 kg

(72.0 lbs)

DCA-NDR-CC 2 43.7 x 89.0 x 72.3 cm

(17.2 x 3.5 x 28.5 in)

32.7 kg

(72.0 lbs)

DCA-NDR-A5 2 43.7 x 89.0 x 72.3 cm

(17.2 x 3.5 x 28.5 in)

32.7 kg

(72.0 lbs)

..