Total 6 results found for the keyword of "eos cvx client configuration"
... identifier or
a single Customer Edge (CE) to the participating multiple Provider Edge
(PE). The default mode of operation is All-active. Introduced in the
eos 4.26.0F for VXLAN, singe-active is
another ...
... distributes operational state information across a set of eos switches to support applications that provide network services. See the CloudVision User Guide, https://www.arista.com/en/support/product-documentation, ...
Configuring EVPN
Configuring BGP-EVPN and VCS on cvx
Configuring BGP-EVPN
Configuring VNI Bundle
A VNI-aware-bundle represents a MAC-VRF that contains Layer 2 route entries from all VXLAN
Network ...
EVPN and VCS Commands
Global configuration Mode
router
general
Router BGP configuration Mode
next-hop
resolution disabled
redistribute
service vxlan
route-target
route-target
export
route-target ...
... hop resolution semantics of BGP routes with an ordered list, or profile, of resolution RIB domains (for example, either tunnel or IP domain). This allows eos to direct specific services over the specified ...
... and destination
addresses..
ACLs can also be made dynamic (not persisting in the eos), and the
payload keyword can be used to
turn an ACL into a User-Defined Field (UDF) alias for use in other ACLs. ...