- Written by Andrew Li
- Posted on 8月 31, 2023
- Updated on 9月 12, 2023
- 1227 Views
This feature enables Flowspec rules to be leaked from one VRF to another. When combined with the ability to apply Flowspec rules from one VRF to interfaces in another VRF, this feature makes it possible to combine rules from different source VRFs into a target VRF, and apply the target VRF’s rules on the interfaces of the source VRFs. For example, in the diagram below, interface Ethernet1 is in VRF Red, Ethernet2 and 3 are in VRF Orange. Suppose Flowspec rules are received from BGP peers on interfaces Ethernet1, 2, and 3. Without this feature, the rules in VRF Red can only be applied on interface Ethernet1, and the rules in VRF Orange can only be applied on interfaces Ethernet2 and 3. Using this feature, the received rules can be leaked from VRFs Red and Orange to VRF Purple, and the leaked rules can be applied on interfaces Ethernet1, 2, and 3.
- Written by Akshay Gattani
- Posted on 12月 19, 2019
- Updated on 1月 11, 2023
- 4678 Views
This feature adds support for static inter-VRF routes. This enables configuration of routes to destinations in one ingress VRF with an ability to specify a next-hop in a different egress VRF through a static configuration.