- Written by Jonathan Ho
- Posted on 6月 28, 2024
- Updated on 7月 1, 2024
- 1208 Views
The ip address virtual command is generally used to conserve IP addresses in VXLAN deployments and can be used to provide an Anycast gateway. On a VLAN, the same IP address can be configured using this command on multiple VTEPS or on both MLAG devices. Release 4.22.1F introduced [ip address virtual support for PIM and IGMP]. Using that solution, users are required to configure pim ipv4 local-interface on the VLAN interface. PIM and IGMP then borrow the IP address from the local interface specified. Using this configuration, IGMP skips subnet checks for received control messages.
- Written by Kallol Mandal
- Posted on 1月 17, 2019
- Updated on 1月 23, 2019
- 8731 Views
In certain VXLAN deployments with either NSX/Logical Router or EVPN IRB, active nodes hosting a virtual IP address