Total 10 results found for the keyword of "eos section 6 2 managing the system clock"
... eos-4.13.2F)
!
vlan 3-4
!
username john secret 5 $1$a7Hjept9$TIKRX6ytkg8o.ENja.na50
!
hostname sales1
ip name-server vrf default 172.17.0.22
dns domain samplecorp.org
!
end
switch#
Specifying ...
... of the time source or,
if that source has an IPv6 address, the first four octets of the MD5 hash of that IPv6 address.
In eos releases prior to 4.23.2, the show ntp status
command identified the system ...
... (eos release
4.25.2F)
Support of 400GBASE-ZR with Open Forward Error Correction (O-FEC) (eos release
4.25.2F)
Override a transceiver slot’s maximum power limit (eos release
4.25.2F)
Platform Compatibility ...
... sections:
managing the Switch Name
system clock and Time Protocols
managing Display Attributes
Logging of Event Notifications
Event Monitor
managing eos Extensions
Switch Administration Commands ...
... the cursor on a blank line after completing the
banner text.
Exit banner edit mode by typing EOF.
EOF
switch(config)#
Configuring prompt
the prompt provides an entry point for eos commands. ...
...
Drop count
Device ID
Egress interface
FCS type
Reserved
TAP Aggregation Extra MPLS Pop (4 to 6 Labels)
Available starting with eos Release 4.23.1F extra MPLS pop for TAP Aggregation ...
... distributes operational state information across a set of eos switches to support applications that provide network services. See the CloudVision User Guide, https://www.arista.com/en/support/product-documentation, ...
... (also configured as a dynamic LAG) on the partner switch. the maximum number of ports per LAG varies by platform; numbers for each platform in the latest eos release are available here: https://www.arista.com/en/support/product-documentation/supported-features. ...
... MLAG peer switches are identical platforms and run identical eos images. Running different images/platform may result in a failure to form an association with the MLAG peer or see discrepancy in behavior. ...
... command replaces the EOS CLI prompt with an SQLite
prompt.switch# event-monitor interact
sqlite>
This command exits SQLite and returns to the EOS CLI
prompt.sqlite> .quit
switch#
event-monitor ...