Total 9 results found for the keyword of "eos 7130 layer 1 configuration"
7130 Platform layer 1 configuration This section describes the purpose, behavior, and configuration of the 7130 platform and includes the following topics: Configuring layer 1 on 7130 Platform Interface Addressing ...
... Considerations The following information should be considered when using the L1 source suite of commands: eos only enforces speed mismatch on Ethernet ...
7130 layer 1 Commands layer 1 configuration Commands l1 source layer 1 Show Commands show l1 destination show l1 matrix show l1 path show l1 source show l1 source capabilities l1 ...
layer 2 Protocol Forwarding eos supports layer2 (L2) Protocol Forwarding on Ethernet interfaces in addition to Type-5 PW. Also, eos allows selective forwarding of certain L2 Protocol packets, such ...
...  sFlow exports packet samples and topology meta data to a centralized collector application. sFlow scales and operates on all switch ports simultaneously. eos implements sFlow on all switches, without ...
... offers an echo function. eos supports asynchronous mode and the echo function. Asynchronous Mode Demand Mode Asynchronous Mode In asynchronous mode, BFD control packets are exchanged by neighboring ...
Quality of Service This chapter describes the eos Quality of Service (QoS) implementation, including configuration instructions and command descriptions. Topics covered by this chapter include ...
...  eos disables PTP globally by default. Enabling PTP on an interface requires the following steps: Setting the PTP Mode Enabling PTP on an Interface Optional PTP global configurations include the ...
... Nexthop groups supports configuring the backup paths through eos RPC APIs and CLI. Whenever the route or prefix begins pointing to configured backup paths, the event monitor database logs a backup activation ...