- Written by Anand Narayanan Rao
- Posted on July 1, 2025
- Updated on July 1, 2025
- 60 Views
Currently data packets going over a DPS+IPsec tunnel have a fixed source IP, destination IP, protocol, source port and destination port after encapsulation for a given DPS path. Because of this, there is no good way to load-balance the tunneled traffic. However, to improve performance there is a need to load-balance the tunneled traffic.
- Written by Anand Narayanan Rao
- Posted on June 20, 2022
- Updated on July 3, 2023
- 8695 Views
In vEos/CloudEos deployed as a WAN router, when DPS (Dynamic Path Selection) is configured, all the user traffic coming from the LAN side and going to the WAN side gets load balanced on the DPS paths. This feature enables the automatic discovery of end to end Path MTU for a DPS Path through an internal probing mechanism.