TOI Author

This feature adds support to configure the following decap group OpenConfig models via gNMI. GRE decap group for incoming traffic with IPv4 or IPv6 inner packets , UDP decap group for incoming traffic with IPv4 or IPv6 inner packets , UDP decap group for incoming traffic with MPLS inner packets

By default, every Arista switch applies the read-only ACL (Access Control List) named "default-control-plane-acl" to control plane traffic in every VRF. This feature allows the user to configure a different ACL to override the system default applied to every VRF. VRF-specific control plane ACL configuration, if present, still takes precedence over the default ACL configured.

Leaf Smart System Upgrade (SSU) provides the ability to upgrade the EOS image with minimal traffic disruption. To perform the SSU, Spanning Tree Protocol (STP) should either be configured as MSTP or Rapid-PVST mode or should be disabled. Meanwhile, all ports should be configured with admin edge ports (i.e., all ports are supposed to connect to host only) and the BPDU guard should be enabled for all edge ports.