Setting the PTP Timeout Interval
To set the timeout multiplier for an interface, use the ptp announce timeout command. The timeout multiplier is the number of announcement intervals that the interface waits without receiving a PTP announcement before a timeout occurs.The values range from 2 to 255. The default multiplier is 3, which results in a 6-second timeout interval when setting the announcement interval to the default of 2 seconds.
This command sets timeout multiplier for the interface to
5. The announcement interval has just been set to
2 (4 seconds), and the
interface times out if it doesn’t receive a PTP announcement for
20
seconds.
switch(config-if-Et5)# ptp announce timeout 5
switch(config-if-Et5)#