◄
►

System Properties

Arista provides System Properties to configure various features and options available in the Orchestrator portal.

In the Operator portal, navigate to the System Properties page, which lists the available pre-defined system properties. See List of System Properties, which lists some of the system properties that you can modify as an Operator.

Figure 1. System Properties

To configure the system properties:

  1. Select New System Property to add a new property.
  2. In the New System Property window, configure the following parameters:
    Figure 2. New System Property

     

    Table 1. New System Property - Options and Descriptions
    Option Description
    Name Enter the Name for the new system property.
    Data Type Choose the required Data Type from the drop-down menu.
    Value Enter the Value for the property according to the data type.
    Value is Password Select Yes or No as required.
    Value is Read-only Select Yes or No for as required.
    Description Enter the Description for the new system property.

     

  3. Select Save Changes.
  4. You can use the Search field to find a specific system property.

    See the section titled, List of System Properties in the Arista VeloCloud Orchestrator Deployment and Monitoring Guide, which lists some of the system properties that you can modify as an Operator.

    Note: It is recommended to contact Arista Support before making changes to the system properties.