- Written by Abhiram Kalluru
- Posted on 9月 11, 2023
- Updated on 11月 7, 2023
- 613 Views
This feature allows FDB export through the OpenConfig AFT YANG models. The streaming behavior of mac addresses are Entries associated with SVI or L3 port have an associated VRF name. The VRF name is used to specify which network instance the FDB entry belongs to.
- Written by Abhiram Kalluru
- Posted on 8月 31, 2023
- Updated on 9月 12, 2023
- 1092 Views
This feature allows exporting IP-in-IP tunnel counters through the OpenConfig AFT YANG models.This exporting IP-in-IP counters feature is supported on all platforms, however counting the IP-in-IP tunnel packets is supported only on DCS-7500R3, DCS-7280R3 and DCS-7800R3 series.
- Written by Abhiram Kalluru
- Posted on 3月 3, 2023
- Updated on 3月 20, 2023
- 1672 Views
This feature introduces a flag to indicate to a gNMI client that the FIB (forwarding information base) or IPv4/IPv6 unicast AFT (abstract forwarding table) have converged and the snapshot is consistent with the device.
- Written by Abhiram Kalluru
- Posted on 6月 16, 2022
- Updated on 6月 17, 2022
- 2572 Views
This feature allows LFIB (Label Forwarding Information Base) & associated counters export through OpenConfig mpls AFT (Abstract Forwarding Tree) YANG model.
- Written by Abhiram Kalluru
- Posted on 12月 20, 2019
- Updated on 12月 20, 2019
- 4284 Views
gRIBI (gRPC Routing Information Base Interface) defines an interface through which OpenConfig AFT (Abstract
- Written by Abhiram Kalluru
- Posted on 8月 17, 2018
- Updated on 10月 2, 2018
- 3639 Views
Prior to this release, BGP in “ribd” mode (when routing protocols are configured in
- Written by Abhiram Kalluru
- Posted on 9月 30, 2015
- Updated on 9月 30, 2015
- 3365 Views
Nexthop Groups is a feature that allows users to manually configure a set of nexthops by specifying their nexthop