- Written by Joseph Walsh
- Posted on 11月 15, 2023
- Updated on 11月 15, 2023
- 1227 Views
The Help Center is an in-product documentation service. You will have access to new and detailed information on all CloudVision features and functionalities. The Help Center is designed to provide this information quickly and with minimal user effort.
- Written by Emma Gallo
- Posted on 2月 2, 2022
- Updated on 2月 2, 2022
- 4793 Views
CVP will generate events when a provisioned device goes out of config or image compliance. When a device is assigned
- Written by Thanh To
- Posted on 3月 15, 2023
- Updated on 3月 15, 2023
- 2502 Views
Input errors from a failed build are now highlighted in Studios. Previously, after a workspace build failed, the Workspace Build Summary will show a list of reasons for the failure.
- Written by Mateus Malvessi Pereira
- Posted on 2月 2, 2022
- Updated on 12月 21, 2022
- 5823 Views
This integration uses TrustSec data from Cisco ISE to create MSS-G configuration to distribute to switches via CloudVision.
- Written by Julie Powell
- Posted on 12月 21, 2023
- Updated on 12月 22, 2023
- 1113 Views
CloudVision now allows you to manage feature licenses for EOS devices in addition to CloudEOS (formerly vEOS) devices. License files, such as those for IPsec, MACsec, and TunnelSec licenses, can be uploaded to CloudVision in order to be viewed, downloaded, or installed onto EOS and CloudEOS devices.
- Written by Wei Zhu
- Posted on 4月 29, 2020
- Updated on 4月 29, 2020
- 4690 Views
MAC/IP Address Search (Beta Feature) NOTE: This is a beta feature and is not enabled by default. In order to enable
- Written by Siman Wang
- Posted on 6月 26, 2023
- Updated on 7月 19, 2023
- 2514 Views
CloudVision supports Single Sign-On (SSO) that allows a user to log in once with a single credential from a third-party identity provider. This opt-in feature is introduced to support mapping roles from the identity provider to roles defined in CloudVision in SSO login.
- Written by Lavanya Conjeevaram
- Posted on 9月 27, 2022
- Updated on 10月 26, 2022
- 3536 Views
MSS-G or Group-Based Segmentation Security is a security feature that allows users to classify network endpoints into segments and define forwarding policies between segments. A given segment contains a set of hosts that should have identical security properties within the network.
- Written by Quang-Minh Pham
- Posted on 1月 12, 2023
- Updated on 1月 12, 2023
- 2937 Views
This feature adds additional functionality to the Settings > Access Control > Providers page behind the “Expanded Custom Provider Creation” beta toggle. Enabling the toggle will allow users to create and name multiple custom OAuth and SAML providers.
- Written by Niko John Arellano
- Posted on 2月 8, 2021
- Updated on 2月 8, 2021
- 4460 Views
This TOI covers the new Omnibox feature released in 2020.3.0. The Omnibox allows users to search across
- Written by Akashdeep Singh
- Posted on 5月 17, 2022
- Updated on 9月 13, 2022
- 3877 Views
Starting from CVP 2022.1.0 it is possible to generate a CSR from the Certificates UI on the Settings and Tools page with an optional SAN IP field. Once an external CA provides the certificate from the CSR, it then can be uploaded back to CVP.
- Written by Julie Powell
- Posted on 6月 26, 2023
- Updated on 6月 26, 2023
- 2220 Views
The Packaging feature is used to export custom change control actions from one CloudVision cluster and install them in another. Package IDs and version numbers can be used to update existing packages with version control.
- Written by Julie Powell
- Posted on 12月 21, 2023
- Updated on 12月 21, 2023
- 1024 Views
In addition to change control actions, users can now package custom dashboards, export them from one CloudVision cluster, and install them in another. Package IDs and version numbers can be used to update existing packages with version control.
- Written by Joseph Walsh
- Posted on 9月 4, 2022
- Updated on 10月 26, 2022
- 3334 Views
Per-Studio RBAC is a new feature that provides CloudVision users with granular control over access permissions for individual studios. A relevant user can grant differing permissions to other users for both management and input configuration of individual studios.
- Written by Joseph Walsh
- Posted on 11月 15, 2023
- Updated on 11月 15, 2023
- 1330 Views
A new suite of actions are available in Actions, which can perform additional operations on devices. Just like with the existing actions, they are added to a change control operation. Being able to provision devices during a change control provides you with more granular control over the actions in a change control operation.
- Written by Julie Powell
- Posted on 12月 21, 2023
- Updated on 12月 21, 2023
- 1104 Views
Provisioning Settings allows you to configure a common set of settings to be used when executing provisioning actions.This gives you more control over how Change Control executes actions, such as the ability to tune provisioning timeouts. To configure provisioning settings, go to Settings > Provisioning Settings.
- Written by Julie Powell
- Posted on 12月 20, 2023
- Updated on 12月 20, 2023
- 1037 Views
Users will now be able to view a new slave port interface metric in Devices and Dashboards for any device with PTP enabled. The metric communicates which interface is marked as the slave port at a given time, according to the PTP algorithm.
- Written by Ankit Agarwal
- Posted on 6月 26, 2023
- Updated on 6月 26, 2023
- 2140 Views
Auth connection timeout configuration allows the user to configure timeout duration that must elapse before an authentication/authorization connection request to RADIUS/TACACS server is retried.
- Written by Ankit Agarwal
- Posted on 6月 26, 2023
- Updated on 6月 26, 2023
- 2116 Views
RADIUS/TACACS Server Ordering allows users to change the priority of RADIUS and TACACS servers and specify which server to try and authenticate with first. It is currently an on-prem only beta feature that can be toggled
- Written by Quang-Minh Pham
- Posted on 5月 17, 2022
- Updated on 9月 13, 2022
- 3937 Views
RADIUS/TACACS Server Ordering allows users to change the priority of RADIUS and TACACS servers and specify which server to try and authenticate with first.
- Written by Joseph Walsh
- Posted on 11月 15, 2023
- Updated on 11月 15, 2023
- 1269 Views
You can enable login to CloudVision via an Identity Provider (IDP) instead of directly through the CloudVision application. When a user logs in to the IDP and their identity is verified, that verification will be used to access CloudVision.
- Written by Quang-Minh Pham
- Posted on 2月 2, 2022
- Updated on 2月 2, 2022
- 4506 Views
Session Management is a new section on the CloudVision Settings > General Settings page that allows users to
- Written by Joseph Walsh
- Posted on 12月 20, 2023
- Updated on 12月 20, 2023
- 1093 Views
The Streaming Telemetry Agent studio now allows you to enable streaming to multiple clusters. In addition, you can now configure a number of flags, including OpenConfig streaming, which previously had to be configured via EOS CLI.
- Written by Masahiro Toyomura
- Posted on 3月 15, 2023
- Updated on 3月 15, 2023
- 2737 Views
Several new features related to the studio development are added. These features are turned off for Inventory & Topology Studio.
- Written by Pavlo Dyachenko
- Posted on 9月 4, 2022
- Updated on 10月 26, 2022
- 3674 Views
Customers who have subinterfaces configured have the possibility to view them alongside regular interfaces. Subinterface counters on EOS are a hardware feature that is disabled by default.
- Written by Shubhransh
- Posted on 5月 17, 2022
- Updated on 1月 19, 2024
- 1063 Views
CVP shell allows users to choose a deployment type during the configuration step of installation. A deployment type can be understood as a special resource and component model based on a particular use case. This allows users to pick a CVP profile that fits their specific use case.
- Written by Adarsh Jain
- Posted on 1月 12, 2023
- Updated on 1月 16, 2023
- 3151 Views
The syslog export feature allows users to export audit logs to external server endpoints and monitor the status of these exports using CloudVision.
- Written by Niko John Arellano
- Posted on 5月 17, 2022
- Updated on 9月 13, 2022
- 3983 Views
Syslog panel is a dashboard element that allows to you view log messages for the devices both in real-time or a selected timeframe.
- Written by Tamas Plugor
- Posted on 3月 15, 2023
- Updated on 3月 15, 2023
- 2455 Views
The TAC Bundle Action is a newly available Custom Action Script that can be used to generate a support bundle containing various EOS logs (tech-support, agent logs and quick traces, syslog, accounting, etc.) on selected devices. This can be useful for an investigation during a TAC case, or even as a proactive measurement before
- Written by Rudi Fockema
- Posted on 1月 12, 2023
- Updated on 1月 12, 2023
- 2807 Views
In a future release, we plan to drop support for device authentication via ingest key completely.To help the customer with this process, we are adding this event that flags all devices running with ingest key authentication.
- Written by Joseph Walsh
- Posted on 11月 15, 2023
- Updated on 11月 15, 2023
- 1219 Views
A filter is used to exclude devices from the topology view. When a filter is enabled, a notification will be displayed in the topology view.How filters function in Topology has been reworked and redesigned. You can now create permanent filters, which are saved in the Filters section of Topology. These filters can be enabled or disabled at any time.
- Written by Joseph Walsh
- Posted on 11月 15, 2023
- Updated on 11月 15, 2023
- 1280 Views
Topology Hierarchy Manager allows you to construct custom topology frameworks for your network. This means that you can customize the topology layout and how devices are mapped to it in a way that best reflects your network.
- Written by Ryan Madsen
- Posted on 4月 29, 2020
- Updated on 4月 29, 2020
- 4539 Views
TOI Topology View Enhancements. This TOI covers the following enhancements to Topology View in the 2020.1.0
- Written by Joseph Walsh
- Posted on 2月 2, 2022
- Updated on 5月 5, 2022
- 6179 Views
The Actions feature is used to create, view, and manage change control actions. A change control action can be a task
- Written by Xinran Ma
- Posted on 1月 12, 2023
- Updated on 1月 13, 2023
- 2765 Views
There are two improvements that have been added to the existing Variable Panel for the 2022.3.0 release.
- Written by Sabah Khan
- Posted on 11月 15, 2023
- Updated on 11月 15, 2023
- 1254 Views
The vertical navigation bar is an update to the layout of CloudVision. It replaces the existing horizontal header with a vertical navigation menu that lines the left side of the page. This allows for a cleaner horizontal header where key functions of CloudVision sections are highlighted.