This chapter describes the DMF Service Nodes available from Arista Networks.
DMF Service Node (DCA-DM-SC/DCA-DM-SC2) Specification
This section describes the LEDs for monitoring environmental and port status on the DMF Service Node (DCA-DM-SC 960GB and1.2TB, DCA-DM-SC2, 960GB, currently shipped appliances will have 960GB SSD).
The DMF Service Node (DCA-DM-SC/DCA-DM-SC2) is an enterprise-class, 2-socket, 1-RU rack-mounted hardware appliance designed to deliver the right combination of performance, redundancy, and value in a high-density chassis. It has 4 SNIs.
Figure 1. DMF Service Node (DCA-DM-SC/DCA-DM-SC2 with 960GB SSD) Bezel
1
Controller Node security bezel
2
LCD menu buttons
3
LCD panel
Figure 2. DMF Service Node (DCA-DM-SC/DCA-DM-SC2 with 960GB SSD) Front Panel
1
System identification button / indicator
5
Power-on indicator / Power button
2
Optical drive
6
Micro USB (not supported)
3
Video connector
7
Information tag
4
USB ports
8
Hard drive
Figure 3. DMF Service Node (DCA-DM-SC with 1.2TB HD) Bezel
1
Controller Node security bezel
2
LCD menu buttons
3
LCD panel
Figure 4. DMF Service Node (DCA-DM-SC with 1.2TB HD) Front Panel
1
System identification button / indicator
5
Power-on indicator / Power button
2
Optical drive
6
Micro USB (not supported)
3
Video connector
7
Information tag
4
USB ports
8
Hard drive
Figure 5. DMF Service Node (DCA-DM-SC/DCA-DM-SC2) Rear Panel
1
Ethernet connector 5 – 10GbE SFP+ Service interfaces SNI1
10
Ethernet connector 2 – Not supported
2
Ethernet connector 6 – 10GbE SFP+ Service interfaces SNI2
11
Ethernet connector 1 – Not supported
3
Ethernet connector 7 – 10GbE SFP+ Service interfaces SNI4
12
USB ports
4
Ethernet connector 8 – 10GbE SFP+ Service interfaces SNI3
13
Video connector
5
PSU status indicators
14
Serial connector (default baud rate 115200)
6
Power supply 2
15
iDRAC Ethernet interface
7
Power supply 1
16
System identification button
8
Ethernet connector 4 – Service Node management port 2 (10/100/1000Mb/s)
17
System identification indicator
9
Ethernet connector 3 – Service Node management port 1 (10/100/1000Mb/s)
DMF Service Node (DCA-DM-SDL/DCA-DM-SDL2) Specification
The DMF Service Node (DCA-DM-SDL/DCA-DM-SDL2) is an enterprise-class, 2-socket, 2RU rack-mount hardware appliance designed for high density, performance, redundancy, and value. It has 16 SNIs.
This section describes the LEDs for monitoring environmental and port status on the DMF Service Node (DCA-DM-SDL 960GB and 1.2TB, DCA-DM-SDL2 960GB. Currently shipped appliances will have 960GB SSD).
Figure 6. DMF Service Node (DCA-DM-SDL/DCA-DM-SDL2 with 960GB SSD) Bezel
1
System identification button / indicator
3
Power-on indicator / Power button
2
Service Node security bezel
4
USB ports
Figure 7. DMF Service Node (DCA-DM-SDL/DCA-DM-SDL2 with 960GB SSD) Front Panel
1
Front video connector
3
Information tag
2
Micro USB (not supported)
4
Hard drive
Figure 8. DMF Service Node (DCA-DM-SDL with 1.2TB HD) Bezel
1
System identification button / indicator
4
LCD panel
2
Service Node security bezel
5
Power-on indicator / Power button
3
LCD menu buttons
6
USB ports
Figure 9. DMF Service Node (DCA-DM-SDL with 1.2TB HD) Front Panel
1
Front video connector
3
Information tag
2
Micro USB (not supported)
4
Hard drive
Figure 10. DMF Service Node (DCA-DM-SDL) Rear Panel
1
Service interfaces SNI8
16
Service interfaces SNI16
2
Service interfaces SNI7
17
Power supply 2
3
Service interfaces SNI6
18
PSU status indicator
4
Service interfaces SNI5
19
Power supply 1
5
Service interfaces SNI4
20
Ethernet connector 4 – Service Node management port 2 (10/100/1000Mb/s)
6
Service interfaces SNI3
21
Ethernet connector 3 – Service Node management port 1 (10/100/1000Mb/s)
7
Service interfaces SNI2
22
Ethernet connector 2 – Not supported
8
Service interfaces SNI1
23
Ethernet connector 1 – Not supported
9
Service interfaces SNI12
24
USB ports
10
Service interfaces SNI11
25
Rear video connector
11
Service interfaces SNI10
26
Serial connector (default baud rate 115200)
12
Service interfaces SNI9
27
iDRAC Ethernet interface
13
Service interfaces SNI13
28
System identification button
14
Service interfaces SNI14
29
System identification indicator
15
Service interfaces SNI15
Figure 11. DMF Service Node (DCA-DM-SDL2) Rear Panel
The following lists the meaning of the callouts in the rear panel.
1
Service interfaces SNI4
16
PSU status indicator
2
Service interfaces SNI3
17
Power supply 1
3
Service interfaces SNI8
18
Ethernet connector 4 – Service Node management port 2 (10/100/1000Mb/s)
4
Service interfaces SNI7
19
Ethernet connector 3 – Service Node management port 1 (10/100/1000Mb/s)
5
Service interfaces SNI2
20
Ethernet connector 2 – Not supported
6
Service interfaces SNI14
21
Ethernet connector 1 – Not supported
7
Service interfaces SNI13
22
USB ports
8
Service interfaces SNI10
23
Rear video connector
9
Service interfaces SNI9
24
Serial connector (default baud rate 115200)
10
Service interfaces SNI1
25
iDRAC Ethernet interface
11
Service interfaces SNI11
26
System identification button
12
Service interfaces SNI12
27
System identification indicator
13
Service interfaces SNI15
28
Service interfaces SNI5
14
Service interfaces SNI16
29
Service interfaces SNI6
15
Power supply 2
DMF Service Node (DCA-DM-SEL) Specification
This section describes the LEDs for monitoring environmental and port status on the DMF Service Node (DCA-DM-SEL 960GB and 1.2TB, currently shipped appliances will have 960GB SSD).
The DMF Service Node (DCA-DM-SEL) is an enterprise-class, 2-socket, 2RU rack-mount hardware appliance designed for high density, performance, redundancy, and value. It has 16 SNIs.
Figure 12. DMF Service Node (DCA-DM-SEL with 960GB SSD) Bezel
1
System identification button / indicator
3
Power-on indicator / Power button
2
Service Node security bezel
4
USB ports
Figure 13. DMF Service Node (DCA-DM-SEL with 960GB SSD) Front Panel
1
Front video connector
3
Information tag
2
Micro USB (not supported)
4
Hard drive
Figure 14. DMF Service Node (DCA-DM-SEL with 1.2TB HD) Bezel
1
System identification button / indicator
4
LCD panel
2
Service Node security bezel
5
Power-on indicator / Power button
3
LCD menu buttons
6
USB ports
Figure 15. DMF Service Node (DCA-DM-SEL with 1.2TB HD) Front Panel)
1
Front video connector
3
Micro USB (not supported)
2
Micro USB (not supported)
4
Hard drive
Figure 16. DMF Service Node (DCA-DM-SEL) Rear Panel
The following lists the meaning of the callouts in the rear panel.
1
Service interfaces SNI4
16
PSU status indicator
2
Service interfaces SNI3
17
Power supply 1
3
Service interfaces SNI8
18
Ethernet connector 4 – Service Node management port 2 (10/100/1000Mb/s)
4
Service interfaces SNI7
19
Ethernet connector 3 – Service Node management port 1 (10/100/1000Mb/s)
5
Service interfaces SNI2
20
Ethernet connector 2 – Not supported
6
Service interfaces SNI14
21
Ethernet connector 1 – Not supported
7
Service interfaces SNI13
22
USB ports
8
Service interfaces SNI10
23
Rear video connector
9
Service interfaces SNI9
24
Serial connector (default baud rate 115200)
10
Service interfaces SNI1
25
iDRAC Ethernet interface
11
Service interfaces SNI11
26
System identification button
12
Service interfaces SNI12
27
System identification indicator
13
Service interfaces SNI15
28
Service interfaces SNI5
14
Service interfaces SNI16
29
Service interfaces SNI6
15
Power supply 2
DMF Service Node (DCA-DM-SN760L) Specification
This section describes the LEDs for monitoring environmental and port status on the DMF Service Node (DCA-DM-SN760L.
The DMF Service Node (DCA-DM-SN760L) is an enterprise-class, 2-socket, 2RU rack-mount hardware appliance designed for high density, performance, redundancy, and value. It has one NVMe Direct Drive.
Figure 17. DMF Service Node (DCA-DM-SN760L) Bezel
1
Service Node security bezel
3
LCD panel
2
LCD menu buttons
Figure 18. DMF Service Node (DCA-DM-SN760L) Front Panel
1
System identification button / indicator
4
Video connector
2
SSD drive
5
Information tag
3
Power button
Figure 19. DMF Service Node (DCA-DM-SN760L) Rear Panel
The following lists the meaning of the callouts in the rear panel.
1
100GbE SFP28 Service interface SNI1, 100GbE SFP28 Service interface SNI2
6
iDRAC Connector
2
Serial connector
7
iDRAC Indicator
3
Power supply 2
8
100GbE SFP28 Service interface SNI3, 100GbE SFP28 Service interface SNI4
4
Video connector
9
Ethernet connectors 1,2 – Service Node management port (10/100/1000Mb/s)
5
USB ports
10
Power supply 1
LEDs and Indicators
The following table lists the meaning of each LED or other indicator.
Indicator, Button, or Connector
Description
Power-on indicator
Green: System power is on
Off: System power is off
LED panel
Blue background: Normal operating conditions
Amber background: Fault detected with error code followed by descriptive text
System identification indicator in front panel
Off: Normal operating conditions
Blue blinking: Activates system identification
System identification indicator in rear panel
Blue: Normal operation condition
Blue blinking: Activates system identification
Amber blinking: Fault detected with error code followed by descriptive text in LCD panel
10/100/1000Mbps Ethernet connector 1, 2
Link indicator
Green: Establishes a valid 1000Mb/s network link
Amber: Establishes a valid 10/100Mb/s network link
Off: Link is down
Activity indicator
Green blinking: Sends or receives Network data
Off: No link activity
100G SFP28 Service node Ethernet connectors
Link indicator
Green: Establishes a valid 100G network link
Off: Link is down
Activity indicator
Green blinking: Sends or receives Network data
Off: No link activity
Power supply status
Green: The power supply has a valid power source andis operational.
Amber blinking: Indicates a problem with the power supply
Off: Power is off
Platform Management Tool
DMF Service Node (DCA-DM-SN760L) supports iDRAC 9 platform management tools.
iDRAC 9 supported features: remote power management, virtual console.
960GB Data Center NVMe Read Intensive AG Drive U2 Gen4 with carrier
Networking
Embedded NIC: Broadcom 5720 Dual Port 1GbE Optional LOM No OCP 3.0 mezzanine
Network adapter: 2 X Intel E810-2CQDA2 dual port 100GbE QSFP28 PCIe adapters
iDRAC9, Enterprise 16G
Power
Dual, hot-plug, redundant power supplies (1+1) 1400W 2U
Additional features
Fan fault tolerance; ECC memory; interactive LCD screen; ENERGY STAR® compliant
Environment
Specification
Temperature – Continuous
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment
Temperature - Storage
-40°C to 65°C (-40°F to 149°F) with a maximum temperature gradation of 20°C per hour
Relative humidity – Continuous
10% to 80% with 29°C (84.2°F) maximum dew point
Relative humidity – Storage
5% to 95% relative humidity with 33°C (91°F) maximum dew point, atmosphere must be non-condensing at all times
Altitude – Continuous
3048m (10,000ft)
Altitude – Storage
12,000m (39,370ft)
DMF Service Node (DCA-DM-SNR660) Specification
This section describes the LEDs for monitoring environmental and port status on the DMF Service Node (DCA-DM-SNR660 (4 X 8TB Hard Drives).
The DMF Service Node (DCA-DM-SNR660) is an enterprise-class, 2-socket, 1RU rack-mount hardware appliance designed for high density, performance, redundancy, and value.
Figure 20. DMF Service Node (DCA-DM-SNR660) Bezel
1
Security bezel
2
LCD Menu button
Figure 21. DMF Service Node (DCA-DM-SNR660) Front Panel
1
System identification button / indicator
4
Information tag
2
Video connector
5
Hard drives
3
Power Button
Figure 22. DMF Service Node (DCA-DM-SNR660) Rear Panel
The following lists the meaning of the callouts in the rear panel.
1
10/25GbE SFP28 Service interface SNI1, 10/25GbE SFP28 Service interface SNI2
6
Video Connector
2
SSD Drives
7
10/25GbE SFP28 Service interface SNI3, 10/25GbE SFP28 Service interface SNI4
3
Power supply 1
8
USB ports
4
Power supply 2
9
iDRAC Connector
5
System identification indicator
10
Ethernet connectors 1, 2 – Service Node Management port (10/100/1000Mb/s)
LEDs and Indicators
The following table lists the meaning of each LED or other indicator.
Indicator, Button, or Connector
Description
Power-on indicator
Green: System power is on
Off: System power is off
LED panel
Blue background: Normal operating conditions
Amber background: Fault detected with error code followed by descriptive text
System identification indicator in front panel
Off: Normal operating conditions
Blue blinking: Activates system identification
System identification indicator in rear panel
Blue: Normal operation condition
Blue blinking: Activates system identification
Amber blinking: Fault detected with error code followed by descriptive text in LCD panel
10/100/1000Mbps Ethernet connector 1, 2
Link indicator
Green: Establishes a valid 1000Mb/s network link
Amber: Establishes a valid 10/100Mb/s network link
Off: Link is down
Activity indicator
Green blinking: Sends or receives Network data
Off: No link activity
10/25G SFP28 Service node Ethernet connectors
Link indicator
Green: Establishes a valid 10/25G network link
Off: Link is down
Activity indicator
Green blinking: Sends or receives Network data
Off: No link activity
Power supply status
Green: The power supply has a valid power source andis operational.
Amber blinking: Indicates a problem with the power supply
Off: Power is off
Platform Management Tool
DMF Service Node (DCA-DM-SNR660) supports iDRAC 9 platform management tools.
iDRAC 9 supported features: remote power management, virtual console.
