- Written by Shyam Kota
- Posted on 9月 2, 2021
- Updated on 9月 2, 2021
- 6380 Views
Line cards, fabric cards, and switch cards now alert the user whenever a card consumes excessive power. There are
- Written by Tom Meng
- Posted on 1月 3, 2023
- Updated on 1月 20, 2023
- 4747 Views
This feature is a CLI show command which displays the history of system power consumption after the system boots up.
- Written by Tom Meng
- Posted on 1月 3, 2023
- Updated on 1月 20, 2023
- 5029 Views
This feature is used to save power by turning off front panel LEDs when they are not needed. After this feature is enabled, LEDs will be turned off after 1 hour from the time of system boots up or feature enabled. Transceiver insertion/removal or USB insertion will cause the LEDs to turn on for 1 hour.
- Written by Sylvia Zheng
- Posted on 12月 5, 2023
- Updated on 2月 26, 2024
- 3056 Views
Pseudo load sharing is a load sharing scheme for two power supply units (PSU) that do not have integrated load sharing. With pseudo load sharing, the system power is divided into two power domains, each with one PSU that is connected to a port group consisting of half of the system's Power over Ethernet (PoE) ports. When both PSUs are active, the power domains are independent and each PSU can only provide power to ports within the same power domain. Each port group can consume up to the maximum available power of the PSU in the same power domain. When only one PSU is active, the power switch between the two power domains can route power from the active PSU to all ports on the system.