- Written by Pankaj Srivastava
- Posted on October 24, 2024
- Updated on October 24, 2024
- 460 Views
Storm control enables traffic policing on floods of packets on L2 switching networks. Support for counting dropped packets and bytes on interfaces where storm control metering is provisioned. Both packet and bytes count are supported and will be displayed. Drop logging on storm-control discards is also supported.
- Written by Pankaj Srivastava
- Posted on September 24, 2024
- Updated on September 30, 2024
- 599 Views
This document describes the support for VNI policing counters on VNIs where the VNI policing feature has been provisioned. Counters for this feature provide information on how many packets are being allowed or dropped for a VNI specific flow due to configured VNI policers. VNI policing counters are supported in both directions which correspond to incoming traffic from a remote VTEP and outgoing traffic towards a remote VTEP. Counters in each direction are configured separately. Both packet and bytes counts are supported.
- Written by Pankaj Srivastava
- Posted on September 11, 2023
- Updated on October 17, 2024
- 3471 Views
The document describes the support for policing on one or more VNIs configured on a Vxlan interface. This feature allows dedicated policing of flows on a VNI in both directions which corresponds to incoming traffic from a remote VTEP and outgoing traffic towards a remote VTEP. Policers in the hardware are created with policer profiles attached to VNIs. Policer profiles can be shared across multiple VNIs but policers are dedicated.