- Written by Karthikeyan Kathiresan
- Posted on 4月 19, 2021
- Updated on 8月 5, 2025
- 7407 Views
Disabling the flooding of broadcast, multicast, and unknown unicast traffic into the VXLAN fabric can significantly reduce bandwidth consumption in the VXLAN underlay. This is particularly beneficial in use cases where such traffic is unnecessary. This feature, exclusively supported with EVPN, allows for the selective flooding of ARP and/or ND traffic, offering further control over bandwidth usage.
- Written by Canberk Akcali
- Posted on 9月 12, 2024
- Updated on 9月 12, 2024
- 4656 Views
Forced periodic ARP refresh adds support for a mechanism that allows forcing ARP/NDP refresh requests to be sent in periodic intervals independently of ARP/NDP entries' confirmed time in the kernel. By default, when a neighbor entry gets confirmed by various processes such as ARP synchronization between MLAG peers, an ARP refresh request is not sent for at least another duration of ARP aging timeout (or ND cache expiry time for the IPv6 case). This feature provides support for a configuration to force sending refresh requests at the configured ARP/ND aging timeout regardless of the last confirmed time.
- Written by Kallol Mandal
- Posted on 10月 15, 2024
- Updated on 12月 12, 2025
- 4656 Views
VXLAN ARP and IPv6 Neighbor Discovery (NDP) packet headend replication capability via VxlanSwFwd matches the COPP rate limit for these packets for the supported platforms regardless of the size of the VXLAN flood VTEP list. However, there still remains a case where the handling capacity is limited by CPU: the handling of ARP broadcast and NS multicast that result from Glean traffic (post routing).
