- Written by Sandeep Betha
- Posted on 1月 31, 2022
- Updated on 9月 15, 2023
- 10241 Views
PIM External Gateways (PEGs) allow an EVPN overlay multicast network to interface with an external PIM domain. They can be used to interconnect two data centers using an external PIM domain in between them.
- Written by Sandeep Betha
- Posted on 1月 22, 2021
- Updated on 2月 6, 2022
- 10611 Views
This feature adds support for user configured BGP Nexthop Resolution RIB profiles for various BGP based services
- Written by Sandeep Betha
- Posted on 6月 4, 2020
- Updated on 6月 4, 2020
- 6265 Views
Current EOS PIM sparse mode implementation installs an (S, G) route in the hardware whenever it receives an (S, G) join
- Written by Sandeep Betha
- Posted on 4月 21, 2020
- Updated on 4月 27, 2020
- 7053 Views
In the ribd routing protocol model, the “maximum paths … ecmp …” command allows restricting the number of BGP
- Written by Sandeep Betha
- Posted on 12月 18, 2019
- Updated on 12月 16, 2021
- 7289 Views
MLDv2 Snooping optimizes the transmission of multicast packets in Layer 2 by using Layer 3 information contained in
- Written by Sandeep Betha
- Posted on 10月 22, 2018
- Updated on 10月 22, 2018
- 7017 Views
This feature allows service providers to interconnect IPv6 sites over a Multiprotocol Label Switching (MPLS)
- Written by Sandeep Betha
- Posted on 5月 1, 2015
- Updated on 5月 1, 2015
- 5105 Views
This feature adds support for standard BGP GSHUT (0xFFFF0000) community. GSHUT community is the community used in
- Written by Sandeep Betha
- Posted on 5月 1, 2015
- Updated on 5月 1, 2015
- 5764 Views
The "set as path prepend" clause in the config route map mode is enhanced to accept the "auto" keyword. The "auto"