TOI Author

Customers currently leverage the event-handler for automated remediation such as auto-drain of nodes during specific triggers (blackholing scenarios, hardware failures). However, there are scenarios where the automation becomes counterproductive or risky during active incidents or anomalies.

The EOS Event Manager feature provides the ability to specify a condition and an action to be carried out when that condition is detected. It is a flexible and configurable way to automate the reaction to conditions without the need for a system operator to observe and apply the desired actions manually.

This document explains how to configure and deploy Arista MSS with Check Point Software Technologies firewalls

The EOS Event Handler feature provides the ability to specify a condition and an action to be carried out when that

The EOS Event Handler feature provides the ability to specify a condition and an action to be carried out when that

The EOS Event Manager feature provides the ability to specify a condition and an action to be carried out when that

The EOS Event Manager feature provides the ability to specify a condition and an action to be carried out when that

The EOS Event Manager feature, introduced in 4.17.0F,  provides the ability to specify a condition and an action

This feature provides a built in monitoring capability for "Adverse Drop Counters" which can be used as a warning that

This feature allows adding third party VTEPs to  a common L2 domain comprising of Arista and non Arista switches

LAGs are allocated hardware resources on transition from one member (software LAG) to two members (hardware LAG) and deallocated hardware resources on transition from two member to one member. This allocation/deallocation causes some traffic disruption. Starting with EOS4.15.4F, the option to configure all LAGs to use hardware resources is supported on the 7500E platform.

This feature provides a configuration option to disable egress IPv4 RACL sharing allowing for uRPF to be configured.

The 7500E 6CFPX LC linecard with ACO CFP2 optics provides connectivity over DWDM systems and links. 7500E 6CFPX LC

Media Access Control Security (MACSec) is an industry standard encryption mechanism to protect all traffic flowing

Delay based ECN on DCS 7280SE and DCS 7500E adds support for measuring the queueing delay that an IPv4 unicast routed

Vxlan routing in multichip systems uses the different modules to do different portions of the packet processing.

When a frame gets bridged from an edge port to a VXLAN core port, it is necessary to encode the QOS fields in the outer

Maintenance mode with sub interfaces is an extension to the maintenance mode feature released in EOS 4 15 2F. With this

Under config router bgp mode, the following is the format for configuring remote port for a peer or peer grou

Unequal Cost Multi Path (UCMP) for BGP is a mechanism for forwarding traffic from a device for an ECMP route in the ratio

CVX High Availability (HA) provides CVX Controller redundancy by having multiple CVX controllers running in a

Hardware Head End Replication (HW HER) optimizes flooding of inter VTEP broadcast, unknown unicast and broadcast

DCS 7280E. Arad QOS MAP:. This command assigns the DSCP rewrite value of 37 to traffic classes 2, 4, and 6.

This document describes VXLAN routing with overlay VRFs on the DCS 7050X platforms. The feature allows users to

The EOS Event Manager feature provides the ability to specify a condition and an action to be carried out when that

EOS 4.15.3F adds support for configuring auto cost in OSPFv3 for routed ethernet interfaces and LAG interfaces.

DCS 7050X/X2/X3 series. DCS 7060X/X2/X3 series. In previous releases, PFC Watchdog supported only queues

Selective Q in Q tunneling feature allows a set of customer VLANs (hereafter referred to as c vlan(s)) to be tunneled

This feature provides the capability to count the number of packets hitting rules associated to egress ACLs applied

With this feature, user can fetch various internal hardware drops info from each switch and isolate the switch or

This feature enables detection of abnormal system flows (total in vs. out packet counters) by showing packet loss

This feature provides the capability to mirror special L2 control frames, called the Pause or Priority Flow Control

IP in IP decapsulation was first introduced for the supported platforms(below) in EOS version 4.15.0F (IP in IP

In our current implementation, on a switch with default startup config or no config, all ports come up in access

The broadcast queue towards the CPU is shared among all interfaces of the forwarding chip. So broadcast storm on a

Dynamic resizing of nexthop groups, as the name suggests, is a feature that enables a nexthop group to dynamically

Port Security: Protect mode (PortSec Protect) is newly added to the Port Security feature and is designed to restrict

The DCS 7280E and DCS 7500E platforms are virtual output queue (VOQ) based architectures where there is a VOQ for all

The NAT Application Gateway (ALG) feature allows FTP connections between client server to be translated using

OSPF Non Stop Forwarding (NSF) adds support for Graceful OSPF Restart, IETF RFC 3623 .  With OSPF Graceful Restart