- Written by Chitra Ramachandran
- Posted on April 15, 2020
- Updated on April 15, 2020
- 3536 Views
Add support for configuring admin distance for OSPFv3 external routes, without this OSPFv3 would always install
- Written by Nikhil Satish Pai
- Posted on June 23, 2021
- Updated on June 23, 2021
- 3475 Views
In an OSPFv3 Area Border Router (ABR), area filters may be used to prevent specific prefixes from being announced by an
- Written by Navneet Sinha
- Posted on June 29, 2016
- Updated on June 29, 2016
- 3444 Views
EOS 4.17.0F adds support for BFD in OSPFv3. BFD provides a faster convergence in scaled deployments where using
- Written by Nicholas Cheng
- Posted on February 23, 2022
- Updated on March 3, 2022
- 3418 Views
This feature adds support for making the various OSPFv3 counters accessible via CLI.
- Written by Nicholas Cheng
- Posted on September 2, 2021
- Updated on September 2, 2021
- 3462 Views
A router keeps track of the total number of LSAs for each OSPFv3 instance. The LSA Limit feature provides a mechanism to
- Written by Sulyab Thottungal Valapu
- Posted on August 25, 2020
- Updated on August 25, 2020
- 3392 Views
This document describes the feature that allows redistribution of DHCPv6 routes into OSPFv3. This
- Written by Chitra Ramachandran
- Posted on April 15, 2020
- Updated on September 7, 2020
- 3386 Views
This document describes the feature that allows redistribution of routes from ISIS to OSPFv3 running on a device.
- Written by Sulyab Thottungal Valapu
- Posted on December 7, 2020
- Updated on December 9, 2020
- 3974 Views
This document describes the feature that allows the redistribution of VRF leaked BGP routes into OSPFv2 and OSPFv3.
- Written by Deeksha Srivastava
- Posted on June 3, 2020
- Updated on June 29, 2023
- 4995 Views
VRF Route leaking can be used when routes from one VRF are required in another VRF (e.g. in case of shared services). If VrfLeak Agent is being used to leak routes, the leaked routes (in destination VRF) can be redistributed into IGPs.
- Written by Navneet Sinha
- Posted on June 29, 2016
- Updated on November 17, 2016
- 3562 Views
EOS 4.17.0F adds support for IPv4 address family in OSPFv3 (multiple address family support) based on RFC5838.
- Written by Sulyab Thottungal Valapu
- Posted on October 29, 2020
- Updated on June 11, 2021
- 3634 Views
This document describes the OSPFv2 and OSPFv3 feature that allows enabling or disabling the inclusion of LSAs having
- Written by Chris Roche
- Posted on August 22, 2023
- Updated on August 22, 2023
- 808 Views
This document describes the OSPFv3 feature that allows the setting of “Down” (DN) bit in type-5 and type-7 LSAs. The DN Bit is a loop prevention mechanism implemented when OSPFv3 is used as CE - PE IGP protocol. Its usage in OSPFv3 is explained by RFC4576. By default, OSPFv3 honors the DN-bit in type-3, type-5 or type-7 LSAs in non-default VRFs.